Appendix - Security Command 1912XR User Manual

Frequently asked questions
This section of the user's guide attempts to answer questions you
might have regarding the operation of your Security Command
system.
Q. If I bypass an exit delay door when I arm the system, will I get an
alarm if I come through it later?
A. You won't get an alarm from the door because it's bypassed but if
you also walk through a motion detector or other armed door inside
the premises you will get an alarm.
Q. When I arm or disarm my Area system, I get ALL? NO YES
displayed. Does this mean all areas in the system?
A. Choosing YES arms or disarms all areas that are authorized for
your security code.
Q. How do I create a schedule that starts at 8:00 am on Monday and
ends at 5:00 pm on Friday.
A. For the OPENING TIME?, enter 0 + 8 + 0 + 0 AM. For the CLOSING
TIME?, at the — : AM PM display press the left SELECT key; this
displays the days of the week SUN MON TUE WED. Press the
COMMAND key once to display the remaining days THU FRI SAT
and then the SELECT key under FRI. At the — : AM PM display,
enter 0 + 5 + 0 + 0 PM. Press COMMAND. The keypad displays the
days of the week again; just press the ARROW key to exit the User
Menu.
This sets the opening time to 8:00 am Monday and the closing time
to 5:00 pm Friday. You can substitute any other day or time in this
example.
Q. What do I do if I want to be in the building past the scheduled
closing (arming) time?
A. If your system is programmed to arm automatically, the keypad
emits a steady tone prior to arming the system. During this tone,
pressing any SELECT key displays ENTER CODE: . Enter your
security code and press COMMAND.
The keypad now displays the enter time display — : AM PM. Enter
in the new time you want the system to arm and press COMMAND.

Appendix

35