Loop Monitor - Security Command 1912XR User Manual

Loop Monitor

User Code Level: 4 and above.
Function: Allows the system to monitor selected disarmed loops
(doors, windows, or motion detectors) and display their name at the
keypad as they're faulted.
Loop Monitor works with any disarmed loop and will also sound the
keypad monitor tone when the loop faults. The loop name is displayed
at all keypads in your system.
You can place any combination of disarmed loops in Loop Monitor but
only the most recent loop faulted is displayed. The displayed loop
name clears automatically after a short time or when the loop is
armed.
Using the Loop Monitor Function
1. Access the User Menu.
2. Press the COMMAND key until LOOP MONITOR? displays.
3. Press any one of the SELECT keys. The keypad displays ALL
NBR for an Area system and PERIM ALL NBR for an All/
Perimeter or Home/Away system.
4. Select PERIM to place all disarmed perimeter loops into Loop
Monitor. PERIM is displayed only on All/Perimeter and Home/
Away systems.
4a. The keypad displays PERIM? ADD RMV.
4b. Select ADD to add all perimeter loops to Loop Monitor.
4c. Select RMV to remove all perimeter loops.
5. Select ALL to place all disarmed perimeter and interior loops into
Loop Monitor.
5a. The keypad displays ALL? ADD RMV.
5b. Select ADD to add all disarmed loops to Loop Monitor.
5c. Select RMV to remove all disarmed loops.
6. Select NBR to enter a specific loop number for loop monitor.
7. If NBR is selected, the keypad displays LOOP : - ADD RMV.
7a. Enter any loop number and select ADD to add this loop.
7b. Enter any loop number and select RMV to remove this loop.
8. The loop number automatically disappears and a new loop
number can then be entered in step 7a.
User Menu
17