Security Command 1912XR User Manual page 35

Area names and numbers
If you have an area system, where your system is divided into up to
eight separate areas, each area can have a custom name or
description that displays at the keypad. This can help you easily track
events when they occur elsewhere in your system.
Area
1 _____________________________________________
2 _____________________________________________
3 _____________________________________________
4 _____________________________________________
5 _____________________________________________
6 _____________________________________________
7 _____________________________________________
8 _____________________________________________
Schedules
Your system uses the following schedule types:
Permanent and Temporary schedules
Primary and Secondary schedules
System Setup
32
Name
Output relays
Your system has ____ output relays that are used to control various
functions within the building or around its perimeter. Below is a list of
those relays and the devices they control.
Output # What it controls
_______ ________________________________________
_______ ________________________________________
_______ ________________________________________
_______ ________________________________________
_______ ________________________________________
_______ ________________________________________
_______ ________________________________________
_______ ________________________________________
_______ ________________________________________
_______ ________________________________________
_______ ________________________________________
_______ ________________________________________
_______ ________________________________________
_______ ________________________________________
_______ ________________________________________
_______ ________________________________________
Use the Output number in the User Menu when setting Output
Schedules or using the Outputs On Off option to manually toggle the
relays.