Electrical Connection - AGA marvel MA15C*S Series Installation, Operation And Maintenance Instructions

Clear ice machine
Table of Contents

Advertisement

Minimum
Model
Height
MA15C**
31"
MO15C**
33
"
3
4
MP15CP*
Table A
Figure 3
Figure 5
INSTALLING YOUR APPLIANCE
Maximum
Height
32"
34
"
3
4
Do not remove
ground prong
Figure 4
Front grille
Front grille screw
!
Electrical Shock Hazard
• Do not use an extension cord with this appliance.
They can be hazardous and can degrade product
performance.
• This appliance should not, under any
circumstances, be installed to an un-grounded
electrical supply.
• Do not remove the grounding prong from the power
cord. (See Figure 3).
• Do not use an adapter. (See Figure 4).
• Do not splash or spray water from a hose on the
appliance. Doing so may cause an electrical shock,
which may result in severe injury or death.

Electrical Connection

A grounded 115 volt, 15 amp dedicated circuit is required.
This product is factory equipped with a power supply
cord that has a three-pronged, grounded plug. It must
be plugged into a mating grounding type receptacle
in accordance with the National Electrical Code and
applicable local codes and ordinances (see Figure 6). If the
circuit does not have a grounding type receptacle, it is the
responsibility and obligation of the customer to provide the
proper power supply. The third ground prong should not,
under any circumstances, be cut or removed.
NOTE
Ground Fault Circuit Interrupters (GFCI) are prone to
nuisance tripping which will cause the appliance to shut
down. GFCI's are generally not used on circuits with power
equipment that must run unattended for long periods of
time, unless required to meet local building codes and
ordinances.
5
WARNING
Figure 6

Advertisement

Table of Contents
loading

Table of Contents