If the product exhibits a distinct change in performance. 2. Product Description The FlexPass OFR100 is an elegant looking reader which can be mounted to metal door frame (mullion) or any flat wall surface. The FlexPass OFR100 uses an electronic module in epoxy potting that ensures successful operation even in harsh environments.
External LED control input Epoxy potted electronic module Built-in 2-color LED (red and green) and beeper sound Motorola 26-bit Wiegand or ABA Track II Magstripe output formats available Mullion mount or Wall mount Operating voltage from 5V to 12VDC Light Lens for magnification of the LED indicator Easy Mounting to a single gang box 4.
FlexPass OFR100 6. Installation 6-1. Mullion/Wall Mount Drill two 6-32 or M3 holes 3.3"(8.38cm) apart in vertical and drill one 1/2" hole for the reader cable 1.7"(4.31cm) apart from the top hole. (If you have installed an electric gang box then skip this step and go to step 6.2.) 6-2.
FlexPass OFR100 7. Wire Color Coded & Wiring I/O Port Name Signal Name Color Coded POWER Power (DC +5V ~ +12V) VDC(+) Red wire Power (Ground) VDC(-)(GND) Black wire INPUT Beeper control Beeper Blue wire LED control Brown wire OUTPUT(Wiegand Format)
FlexPass OFR100 9. Wire Connection to FlexPass SDC1000 Single Door Controller 10. Operation 10-1. Once power is applied, the Red LED should be on and you should hear three beeping sounds indicating that the reader is in standby mode after a successful initialization and diagnostics.
4. Consult the dealer or an experienced radio/TV technician for help. 12. Warranty and Service FlexPass OFR100 warranty is 3 years from the shipped date; returns must have an RMA (Return Material Authorization) number. The customer is to provide a description of the specific problem. The customer is to include serial numbers, formats, and model numbers with the items to be returned.
Need help?
Do you have a question about the FlexPass OFR100 and is the answer not in the manual?
Questions and answers