Table of Contents
Advertisement
D D i i s s p p l l a a y y
SVC LED
This option allows you to select whether or not the
service light in the top left-hand corner of the phone
is used.
The following options are available.
Set: the service light flashes when the phone is
ready for use.
Cancel: the service light is not used except when
you switch the phone on.
Language
You can select a display language. Select the desired
language between English and Chinese.
104
Menu 7.5
Sounds
The Sounds menu enables you to:
• Set the ring type and tone
• Adjust the ring volume
• Set the alert tone to sound when you are
connected to or disconnected from the system.
• Set the length of the DTMF tone.
Ring Type
This option allows you to indicate how you are to be
informed of any incoming calls.
The following options are available.
Bell: The phone rings using the ring tone selected
via the Ring Tone menu option (8-2).
Vibrator: The phone vibrates but does not ring.
Lamp: The backlight is switched on and the service
light blinks; the phone neither rings nor
vibrates.
Vib + Bell: The phone vibrates and rings.
Bell + Vib: The phone rings and vibrates.
Bell ++: The phone rings using the ring tone, but the
ring volume increase from the lowest.
Bell --: The phone rings using the ring tone, but the
ring volume decrease from the loudest.
Menu 8.1
105
Advertisement
Table of Contents
