Advertisement
Location and Function of Parts and Controls
[iID CHROMA buttons
Press+ for more color intensity or - for less.
[1§1 PHASE buttons
This button Is effective only for the NTSC3.58 and NTSC4.43
color system.
Press GAN (green) to make the skin tones greenish or
PUR (purple) to make them purplish.
-
T he APERTURE, CHROMA, PHASE control settings have
no effect on the pictures of analog RGB or digital RGB
signals.
li1J
CONTRAST buttons
Press+ to make the contrast, color intensity and
brightness stronger or - to make them weaker.
Iii] VOL (volume) buttons
Press+ for more volume or - for less.
ID] POWER
switch
and indicator
Depress to tum the monitor on.
The indicator will light up In green.
Press the switch again to tum the monitor off.
8
!iDI
INPUT select buttons
Press to select the program to
be
monitored.
A:.
for a signal fed through the LINE A connectors.
B:
for a signal fed through the LINE B connectors.
Y/CNTR:
for a signal fed through the VIC-INPUT
connectors or VTR connector.
When both the VIC-INPUT and VTR connectors are
connected to video equipment, the Input signal fed
through the VIC-INPUT connector has priority over the
one fed through the VTR connector.
RGB:
for a signal fed through the ANALOG RGB
connectors or DIGITAL RGB connector.
lnJ
ANALOG/DIGIT AL
(EXT
SYNC) button
This button functions as ANALOG/DIGITAL selector
and
EXT SYNC selector.
As ANALOG/DIGITAL selector
Depress to monitor a signal fed through the ANALOG
RGB connectors.
Release to monitor a signal fed through the DIGITAL RGB
connector.
For EXT SYNC selector
Depress to operate the monitor on an external sync signal
fed through the EXT SYNC connector on the rear panel
(EXl).
Release to operate the monitor on the sync signal from
the displayed composite video signal (INT).
~
RESET button
Press to return the PHASE, CHROMA. BRIGHT
and
APERTURE control settings to the factory set levels.
Hide quick links:
Advertisement
