Specifications - Sony TRINITRON PVM-1942Q Operating Instructions Manual

Specifications ......_
Video signal
Frequency response
Line input: More than 7 MHz (-3 dB)
VIC input: More than 8 MHz (-3 dB)
Component input (Y/R-YIB-Y): More than
a
MHz
(-3dB)
R.G.B. input (analog): More than 9 MHz (-3 dB)
Chrominance subcarrier attenuation
3.58 MHz: Less than -30 dB (comb filter)
4.43 MHz: Less than -36 dB (trap filter)
Band pass 3.58 MHz: 2 MHz equiband
4.43 MHz: 2 MHz equiband
Chrominancelluminance time error
Composite: Less than ±100 ns
V/C Video: Less than ±50 ns
Component: Less than ±50 ns
Aperture correction
-4.5 to +6.5 dB (at 4.5 MHZ)
Synchronization AFC time constant: 1 msec
Line pull range Horizontal: ±500 Hz
Vertical: 8 Hz
Picture performance
Normal scan
Under scan
H. linearity error
V. llnearity error
Convergence
7% overscan of CRT effective screen area
3% underscan of CRT effective screen area
Less than 8%
Less than 7%
Central area: 0. 7 mm (Typica~
Peripheral area: 1.3 mm (Typical)
Raster size stability
H: 1.0%, V: 1.5%
High voltage regulation
4%
Audio output 0.6 W (Max.)
CRT SMPTE C phosphor
Color temperature
6,500°KJ9,300°K (+8MPCD), selectable
Inputs
For both models
VIDEO IN: BNC connector
AUDIO IN: Phono jack
VTR: 8-pin connector
(See
"VTR connector" on page 14.)
VIC-INPUT
VIDEO: 4-pln DIN connector (See "VIC-INPUT connector" on
page 15.)
AUDIO: Phono jack
PVM•1944Q only
EXT SYNC: BNC connector
composite sync 1-4 Vp-p, negative, 75 ohms terminated,
automatically released when cable Is connected to the output
connector.
ANALOG RGB/COMPONENT: BNC connector
R, G, Band Y channels: 0.7 Vp-p, ±6 dB, non composite
R·Y and B·Y channels: 0.525 Vp-p, ±6 dB
(Standard color bar signal of 75-percent chrominance)
When the composite signal is fed to the G or Y channels, the
monitor can be activated in the internal sync mode.
75 ohms terminated, automatically released when a cable is
connected to the output connector.
CTRL S: Mlnljack
PVM•1942Q only
EXT SYNC: BNC connector
composite sync 1-4 Vp-p, negative, 75 ohms terminated,
automatically released when cable is connected to the output
connector.
ANALOG RGB: BNC connector
0.7 VP•P, ±6 dB, non composite
75 ohms terminated, automatically released when cable is
connected to the output connector.
DIGITAL RGB: 9-pln connector (See "DIGITAL RGB connector" on
page 14.)
CTRL S: Minijack
Outputs
For
both
models·
VIDEO OUT: BNC connector
Loop-through
AUDIO OUT: Phono jack
Loop-through
~Y~.-1~!4q_9_!1~Y- ....
EXT SYNC: BNC connector
Loop-through
ANALOG RGBICOMPONENT: BNC connector
Loop-through
CTRL S: Minijack
Loop-through
PVM•1942Q only
SYNC: BNC connector
Loop-through
ANALOG RGB: BNC connector
Loop.through
CTRL S: Mlnijack
Loop-through
General
AC regulation range
110 - 130 V AC,
50/60
Hz
Power consumption
Approx. 130 W
Operating temperature range
0°C to +35°C (32°F to 95°F)
Dimensions Approx. 452
x
458
x
513 mm (w/h/d)
(17 7 /,
x
18 1 /,
x
20¼ inches)
Weight Approx. 31 kg (68 lb 5
oZ)
Supplied accessory
Rack mounting bracket (for EIA standard racks)
(1 set)
13