Alarm And Hourly Time Signal - Seiko H601 Instructions Manual

ALARM AND HOURLY TIME SIGNAL

Alarm mark
Hourly time signal mark
Hour
Alarm time setting
1. Press "A" to show the ALARM display, and then press "B" to
B
activate the ALARM SETTING function. HOUR digits flash.
2. Press "B" repeatedly to select the digits to be adjusted in the
following order.
ALARM DISPLAY
A
Alarm set display mark
Minutes
→ →
HOUR MINUTES
↑
3. Press "A" to set the digits.
* If "A" is kept pressed, the digits advance quickly.
4. Press "B" to return to the ALARM display.
* If the watch is left untouched in the ALARM display or with
digits flashing, the display will automatically return to the
CALENDAR display after 1 to 2 minutes.
Note: Check that AM/PM is set properly in the 12-hour indication.
Only "P" (PM) is displayed. For the AM setting, there is no
indication.
Alarm and hourly time signal engagement
B
With each press of both "A" and "B" in the CALENDAR or TIME
display, the alarm and hourly time signal marks appear and
disappear in the following order.
A