Table of Contents
Advertisement
Quick Links
manual-rmp210-rmp3545-en-18
Multilayer Press RMP 210 and RMP 3545
Translation of the original instructions
Table of Content
Preface.......................................................2
Technical Data..........................................3
EG-Declaration of conformity..................4
Short instructions.....................................5
Intended Use.............................................6
Safety Regulations...................................6
Composition..............................................7
Setup..........................................................8
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck - Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de
Page 1 / 16
Work process..........................................11
Composition of Press Stack..................12
Cleaning and maintenance....................14
Spare part list..........................................14
Guarantee................................................15
Disclaimer of Warranty...........................15
Copyright.................................................15
Pressing Preferences.............................16
Advertisement
Table of Contents
Related Manuals for Bungard RMP 210
Summary of Contents for Bungard RMP 210
-
Page 1: Table Of Contents
Safety Regulations........6 Disclaimer of Warranty......15 Composition..........7 Copyright..........15 Setup............8 Pressing Preferences......16 Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 2: Preface
• PCB stack is taken out of the machine • Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 3: Technical Data
Press stack height Technical changes possible and reserved at any times. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 4: Eg-Declaration Of Conformity
Maschinenrichtlinie / Machinery Directive 2006/42/EG/37/EG Windeck, 10.1.2018 Jürgen Bungard Geschäftsführer Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 5: Short Instructions
Let the press stack cool sufficiently before removing it or wear appropriate protective gloves. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 6: Intended Use
Page 6 / 16 Intended Use The multilayer presses RMP 210 and RMP 3545 are used for the production of multilayers in an in- dustrial-type equivalent frame. All other applications require our written consent or at the user's own risk. -
Page 7: Composition
Operating panel vorne Lagerraum hinten Kompressor front storage back compressor Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 8: Setup
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... - Page 9 Pressing the [START/STOP] button activates the relay and the set time begins to count down in one second steps. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de...
- Page 10 ATTENTION: If the set temperature is too low or the process time too short, this can lead to rejects and delamination. Both destroy the multilayer circuit. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de...
-
Page 11: Work Process
100 ° C, you can reduce the process times to half an hour. This adjustment is solely the re - sponsibility of the supervisor and we disclaim all liability. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 12: Composition Of Press Stack
Set this pressure at the machine. For small pcbs we generally recommend to panelize the pcb and so increase the press area. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... - Page 13 Fixation with reference rivets Copyright by Bungard Elektronik GmbH & Co. KG Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de...
-
Page 14: Cleaning And Maintenance
Relais für RMP210 Relays for RMP210 6000 K2590-16 6000 MP671140 6000 MP671140a Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 15: Guarantee
Old parts become our property. Disclaimer of Warranty Bungard GmbH & Co. KG reserves the right to make any changes or improvements to any machine or machine specification it deems necessary at its sole discretion, and assumes no obligation to imple - ment such changes in previously sold machines. -
Page 16: Pressing Preferences
9,960 11,4 62,3 15,8 107900 10790,0 10,790 12,3 67,4 17,1 Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de...