Lighting Color Chart - Altec Lansing XPEDITION 8 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Charging External Devices

The Xpedition can charge your phone or

other portable device.

La Bocina puede cargar otro dispositivo portátil.

• Using an approved USB charging cable for

your device, connect to the USB type A port

on the back of the Xpedition. Connect the

smaller end to your portable device.

· Con el cable de carga USB correcto para su

dispositivo, conéctelo al puerto USB tipo A en la

parte posterior de la Bocina. Conecte el extremo

más pequeño a su dispositivo portátil.

• Once connected, you should see the

charging indicator activate on your

portable device.

· Una vez conectado, debe ver que el indicador

de carga de su dispositivo portátil indica que está

recibiendo una carga.

Note: Charging and power ports are

located behind the waterproof cover on the

back of the Xpedition.

Los puertos de carga y de alimentación se

encuentran detrás de la cubierta impermeable en

la parte posterior de la bocina.

Weather Resistance (IP67 Rating)

The Altec Lansing Xpedition is IP67 rated, meaning

it is dust resistant and capable of being submerged

for up to 30 minutes at a depth of 1 meter. However,

that doesn't mean your new speaker is indestructible.

Other factors – like the corrosiveness of the liquid

due to it containing salt or chlorine – can affect the

overall integrity of the enclosure. If your Xpedition

is exposed to any substance other than clean water,

it's a good idea to clean the unit with a clean,

soft cloth. Give the unit time to dry completely

before connecting it back to mains power.

Note: The unit is only protected when the rear

rubber port cover is properly in place, if not, the unit

is not sealed from damage and care should be taken

to protect it from any exposure to liquids or dust.

USB OUTA

UX IN

5V / 2A

AC IN

DC IN 12V 3A

110-240V

ALP-XP800 XPEDITION

Lighting Modes and Color Control

The Xpedition has multi-color lighting built into

the front of the unit. There are 3 main light areas

– Speaker cones, speaker surround and the strobes.

Pressing the LIGHTS button directly above the

Volume knob cycles through the different lighting

modes:

• Mode 1: Lights stay on solid and cycle colors

every 10-15 seconds. If user changes color, lights

remain the selected color.

• Mode 2: Lights pulse at 120 BPM, with speaker

and ring in different colors. If user changes color,

lights remain the selected color.

• Mode 3: Lights pulse to the beat of the music,

with speaker and ring lit the same color. User

can change light color.

• Mode 4: Lights pulse to the beat of the music,

with speaker and ring in different colors. If user

changes color, lights remain the selected color.