Table of Contents
Advertisement
NOTICE
Failure of the external protection
If the paint finish is damaged, the geared motor may corrode.
Do not damage the paint finish.
Note
Information about the ability to be repainted does not guarantee the quality of the paint
product supplied by your supplier.
Only the paint manufacturer is liable for the quality and compatibility.
2.5.2
Painted version
The corrosion protection system is classified according to the corrosiveness categories in
DIN EN ISO 12944-2.
Table 2- 2
Paint system
Corrosiveness category C1, unpainted for gearbox and motor housings made of aluminum
-
Corrosiveness category C1 for normal environmental stress
1-component hydro paint, top coat
BA 2030
Operating Instructions, 11/2017, A5E37880173A/RS-AE
Paint according to corrosiveness categories
Description
Indoor installation
•
Heated buildings with neutral atmospheres
•
Resistance to greases and some resistance to
•
mineral oils, aliphatic solvents
Standard
•
Indoor installation
•
Heated buildings with neutral atmospheres
•
Resistance to greases and some resistance to
•
mineral oils, aliphatic solvents
Standard paint for gearbox housings made of cast
•
iron
Technical description
2.5 Surface treatment
17
Advertisement
Table of Contents
