Advertisement
DLED4R DLED6R INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We'd like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: marketing@rabweb.com
WIRING
WARNING: To prevent wiring damage or abrasion, do
not expose wiring to edges of sheet metal or other sharp
objects.
Fixture operates at 120V 60 Hz and can be dimmed with
most forward phase incandescent dimmers. For a list of
compatible dimmers see www.rabweb.com
1.
Screw in medium base socket adaptor.
2.
Connect GROUND wire from DLED fixture to the
existing housing with # 8 screw provided to any
existing housing hole as shown or drill a new 1/8"
diameter hole.
3.
Plug in wire connector between socket adaptor and
DLED fixture.
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool enough to
touch. Do not clean or maintain while fixture is energized.
1. Clean lens & fixture with non-abrasive cleaning solution.
2. Do not open fixture to clean the LED. Do not touch the LED.
TROUBLESHOOTING
Check that the line voltage at fixture is correct.
1. Check that the socket adaptor is properly seated in the socket.
2. Do not attempt to modify the socket in any way.
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation
or maintenance.
Easy Answers
rabweb.com
© 2018 RAB LIGHTING Inc.
Visit our website for product info
Northvale, New Jersey 07647 USA
DLED4RR DLED6RR IN 0218
Medium Base Socket
Existing Housing
DLED4R
Tech Help Line
Call our experts - 888 722-1000
Fig. 2
UL CLASSIFIED FOR RETROFIT
COMPATIBILITY
Check that the existing housing is one of the following
compatible fixtures.
1.
Retrofit has an E26 Edison screw-base.
DLED4R and DLED6R can be used in existing housings
2.
with opening of 4 or 6". These fixtures are UL Classified
for retrofit in the following housings:
•
Halo: Housing Series H99TAT
•
Elite: B4, B4IC, BL4_Baffle, ID4-AT
•
Nora: NS-401QAE, NS-401QAT, NSR-404QAT
•
Halo: Housing Series H7x, H27x, ET7x, Ei7x, ET27x, EI27x
•
Halo H750ICAT, H750RICAT, H750T and H750TCP series
recessed LED housings.
•
Juno:IC22, IC22R, IC22W, IC22S, IC23, IC23W, IC21, IC21R,
TC2, TC2R
•
Capri: CR1, PR1, QL1, R9ASIC
•
Progress: P87-AT, P86TG
•
Lithonia: L7X, L7XP
•
Thomas: PST, R9ASIC/PS9RM
•
Prescolite: IBXS
•
Commercial Electric: H3
•
Elco: EL71CA
•
Elite: B6IC-AT-W
e-mail
Answered promptly - sales@rabweb.com
DLED6R
Free Lighting Layouts
Answered online or by request
Advertisement
