Using The Smartclick Nose Trimmer - Philips Series 5000 Safety Instructions

English
18

Using the SmartClick Nose Trimmer

Trimming nose hair
Trimming ear hair
Make sure nasal passages are clean.
-
Do not insert the tip more than
-
3/16in/0.5cm.
1 Attach the nose trimmer to the shaver ('click').
2 Turn shaver on.
3 Gently move the tip in and out of nose while
turning it around to remove all unwanted hairs.
4 Turn shaver off when finished.
5 Clean the trimmer thoroughly after each use
(see 'Cleaning').
Make sure outer ear channels are clean
-
and free from wax.
Do not insert the tip more than
-
3/16in/0.5cm.
1 Attach the nose trimmer to the shaver ('click').
2 Turn shaver on.
3 Slowly move the trimmer along the rim of the ear
to remove hairs that stick out beyond the rim.
4 Insert the trimmer into the outer ear channel.
Be careful not to insert the tip more than
3/16in/0.5cm into your ear channel.