Using The Smartclick Trimmer - Philips NORELCO 5000 Series Manual

ENGLISH
16
C
3 Rinse the shaving unit under the tap
to ensure that the shaving unit glides
smoothly over your skin.
Press the on/off button once to switch on
4
the shaver.
C
Move the shaving heads in circular
5
movements over your skin.
NOTE: Rinse the shaver under the tap regularly
to ensure that it continues to glide smoothly over
your skin.
6 Dry your face and thoroughly clean
the shaver after each use (see chapter
'Cleaning').
NOTE: Make sure you rinse all foam or gel off the
shaver.
C
7 Place the Protective Cap on the shaver to
protect heads.

Using the SmartClick Trimmer

C
1 Pull the shaving unit straight off the shaver.
NOTE: Do not turn the shaving unit while you
pull it off the shaver.
C
2 Insert the raised notch of the SmartClick
trimmer into the slot in the top of the
shaver. Press the trimmer down to attach it
to the shaver. You will hear a 'click'.
3 Turn shaver ON.
C
Hold trimmer to exact hairline desired.
4
Move trimmer downward with gentle
pressure.
Trim beard, moustache or sideburns using
5
the trimmer.
6 Turn shaver OFF when finished.
Thoroughly clean the trimmer (see
7
'Cleaning').
C
8 Pull the trimmer straight off the shaver.
NOTE: Do not turn or twist the trimmer while
you pull it off the shaver.
C
Insert the raised notch of the shaving unit
9
into the slot in the top of the shaver. Press
the shaving unit down to attach it to the
shaver. You will hear a 'click'.
ENGLISH
17