Philips Series 5000 Safety Instructions page 24

English
24
1
2
7 sec.
5 Place a new shaving head in the holder.
Make sure the projections of the shaving head
fit exactly into the recesses on the shaving head
holder.
6 Hold the shaving head holder in your hand and
place the retaining ring on the shaving head
holder (1). Turn clockwise (2) to reattach the
retaining ring.
Do not place the shaving head holder on a surface,
as damage may occur.
7 Repeat this process for the other two cutters
and combs.
NOTE: Each retaining ring has two recesses and
two projections that fit exactly in the projections
and recesses of the shaving head holder. Make
sure you hear a 'click' indicating the retaining
ring is fixed into place.
8 Reinsert the hinge of the shaving head holder
into the slot of the shaving unit. Close the
shaving head holder (click).
9 To reset the shaver, press and hold the On/Off
button for approximately 7 seconds.
This shaver has no other user-serviceable parts.
For assistance, call 1-800-243-3050.