Table of Contents
Advertisement
M M e e s s s s a a g g e e s s
To view this message, press the View soft key. The
screen shows the:
• Sender's phone number (if sent with the message)
or recipient's phone number
• Message text
To scroll through the message, press the
You can choose the following options, by pressing
the Options soft key.
Delete: allows you to delete obsolete messages.
Text Reply: allows you to reply by sending a text
message. You can also change the SMS center
number (if required).
Call Back: allows you to call the sender back.
Cut Number: allows you to extract a number from
the message text, so that you can call the number or
save it in the phonebook.
Send: allows you to send a message that you have
received or saved. You can:
• Send the message
• Save and send the message
• Save but not send the message
Edit Message: allows you to edit a message.
Note: The available options may vary, depending on
the message status (New/Old, Not Sent or
Sent for example).
56
key.
Write Messages
Via this menu, you can write text messages of up to
160 alphanumeric characters. For further information
on how to enter the characters in your message,
refer to page 33.
Note: While writing a message, pressing the
inserts a carriage return.
After you complete the message and press the OK
key, you can select the following options.
Send Only: Enter the destination and select a
setting group in which you set up default information
on the SMS feature via the Setup menu (see the
following page).
Save and Send: allows you to save a copy of the
message and then send the message to the required
destination. You are also required to select a setting
group. You can read the message in your outbox using
the Read Messages option. Sent is displayed when
you read the message to indicate the message status.
Save Only: allows you to save the message so that
it can be sent later. When you read the message in
your outbox, Not sent is displayed.
M M e e s s s s a a g g e e s s
Menu 2.3
key
57
Advertisement
Table of Contents
