Programming The Sound Bar - Vizio SB36512-F6 Quick Start Manual

PROGRAMMING THE SOUND BAR

You can program your sound bar to accept TV remote IR commands. Press the Menu button on the remote, then use
the Up/Down buttons to navigate to Prg Remote. Use the Next/Previous buttons to toggle through Learn Vol -, Learn
Vol +, and Learn Mute.
Function LED Behavior
Learn Volume
Down
Learn Vol-
(Waiting to learn)
Flash from bottom
to top and back
continuously.
Learn Volume Up
Learn Vol+
All of the LEDs
will blink twice to
confirm.
Learn Mute
Learn Mute
Turn off your TV speakers when
programming your sound bar.
Press the Play button to put the sound bar into learning mode. While the sound bar is in
learning mode, press the Volume Down button on the TV remote
control. All of the LED Indicators on the sound bar will flash two times indicating that it
has successfully recognized the TV remote.
Press the Play button to put the sound bar into learning mode. While the sound bar is in
learning mode, press the Volume Up button on the TV remote control. All of the LED Indica-
tors on the sound bar will flash two times indicating that it has successfully recognized the TV
remote.
Press the Play button to put the sound bar into learning mode. While the sound bar is in
learning mode, press the Mute button on the TV remote control. All of the LED Indicators
on the sound bar will flash two times indicating that it has
successfully recognized the TV remote.
Description
Point both the sound bar and TV
remotes towards the front of the
sound bar when programming.
English - 25