Vizio SB36512-F6 Quick Start Manual page 22

Function
TV Remote
VZtv Rmt On
Program Remote
Prg Remote
Eco Power On/Off
Eco Pwr
Power LED
Pwr LED
Speaker Test
Spkr Test
English - 22
LED Behavior
TV Remote On
TV Remote Off
−−
Eco Power On
Eco Power Off
Power LED On
Power LED Off
—
Description
Press the Next/Previous button to enable/disable VIZIO TV Remotes. When
enabled (On), you can use a VIZIO TV remote control to turn on the sound bar
(using the TV Volume Up button) and control volume.
Press the Next/Previous and Play buttons to toggle and select and program
your TV remote to control the Volume Down, Volume Up, and Mute functions
on your sound bar. See the Programming the Sound Bar section for more
information.
Press the Next/Previous button to enable/disable Eco Power Mode. When
enabled (On), the sound bar will go into standby after a period of inactivity.
The sound bar will automatically turn off when no audio signal is detected. Off
disables this feature. Note: If you would like to cast content without the need to
manually turn on the sound bar, set this function to OFF.
Press the Next/Previous and Play buttons to enable/disable the Power LED.
Press the Play/Pause button to activate the speaker test function. A voice will
begin calling out each speaker beginning with left front . (Left Front, Center,
Right Front, Right Rear, Left Rear, Left Front Height, Right Front Height, and
subwoofer-white noise) If any of these are missing, check the connection and
run the speaker test function again.