Programming The Sound Bar - Vizio SB3651-F6 Quick Start Manual

PROGRAMMING THE SOUND BAR

You can program your sound bar to accept TV remote IR commands. Press the Menu button on the remote, then use
the Up/Down buttons to navigate to Prg Remote. Use the Next/Previous buttons to toggle through Learn Vol -, Learn
Vol +, and Learn Mute.
Function
Learn Volume Down
(Waiting to learn)
Learn Vol- Flash from bottom to top
and back continuously.
Learn Volume Up
Learn Vol+
All of the LEDs will blink
twice to confirm.
Learn Mute
Learn Mute
LED Behavior
Press the Play button to put the sound bar into learning mode. While the sound bar
is in learning mode, press the Volume Down button on the TV remote
control. All of the LED Indicators on the sound bar will flash two times indicating that
it has successfully recognized the TV remote.
Press the Play button to put the sound bar into learning mode. While the sound bar is in
learning mode, press the Volume Up button on the TV remote control. All of the LED Indi-
cators on the sound bar will flash two times indicating that it has successfully recognized
the TV remote.
Press the Play button to put the sound bar into learning mode. While the sound bar
is in learning mode, press the Mute button on the TV remote control. All of the LED
Indicators on the sound bar will flash two times indicating that it has
successfully recognized the TV remote.
Description
Point both the sound bar and TV remotes
Front
towards the front of the sound bar when
programming.
Top
Turn off your TV speakers when
Back
programming your sound bar.
Side
English - 23