Table of Contents
Advertisement
7-3. Setup Menu Details
The SETUP MENU consists of four pages, PAGE 1/4 to PAGE 4/4.
During RECORD MODE, however, display is limited to the camera settings page.
Currently selected item is highlighted with grey background.
Displaying the SETUP MENU
The SETUP MENU is displayed in the viewfinder and the monitor (HDMI output) when the MENU SELECT
button (#17 on P4) is pressed and held down while the camera is in RECORD MODE.
MENU SELECT / CURSOR KEY button operation
1） UP/DOWN KEY ： Moves the cursor within in the current page to
▶
▶
2） LEFT/RIGHT KEY ： Changes the setting choices for the current
3） PUSH ： Enters the selected choice for the menu item.
Changing the SETUP MENU page
Select the PAGE display at the top of the page, then use the LEFT/RIGHT control or
push the MENU SELECT button in to change the SETUP MENU page.
Exiting the SETUP MENU
Select the EXIT display at the bottom of the page and push the MENU SELECT button in
to exit the SETUP menu, or press the PLAY/REC SELECT button to exit the SETUP MENU
at any time. The menu display will also disappear after 60 seconds of interface inactivity.
SETUP MENU PAGE 1/4
SYSTEM SETUP
AE MODE
SHUTTER SPEED
AE LEVEL
WHITE BALANCE
DYNAMIC N/R
FOG MODE
EDGE
CHROMA GAIN
BACKLIGHT CMP.
V/F BRIGHT
EXIT
▶
1. AE MODE
Automatic Exposure Setting
Automatically adjusts the shutter speed and gain for best image levels.
FULL AUTO
When DC Iris Lens is used, the iris settig is also automatically adjusted.
FULL AUTO setting is recommended for normal use.
（The factory setting is FULL AUTO.）
※Works on Color/IR modes
select a menu item.
menu item.
（PAGE 1/4）
FULL AUTO
1/100
AUTO W/T
HIGH
OFF
OFF
14
Fixes the shutter speed and attempts to get the best image levels by adjust-
TIME VALUE
ing the gain (and iris when used with DC Iris Lens).
A fast-moving subject may be recorded with more clarity by setting a fast
shutter speed. Fluorescent light flicker may be reduced by setting an optimal
shutter speed （1/100 shutter speed for 50Hz power frequency, for example).
SHUTTER SPEED
The shutter speed can be set to desired value when AE MODE is set to TIME
VALUE. The following shutter speeds may be chosen:
1/8, 1/15, 1/30, 1/60, 1/100, 1/125, 1/250,1/500,
1/1000, 1/2000, 1/4000, 1/10000
▶
2. AE LEVEL
Adjusting the Automatic Exposure convergence level
-100∼10
Move the marker to the right for brighter setting.
Choose the best setting for actual conditions.
※Works on Color/IR modes
▶
3. WHITE BALANCE
White Balance Setting
Choose from seven presets and two automatic settings depending on the light source and actual
recording conditions.
※Works on Color mode only
BLUE SKY
Use in clear sky conditions
outdoors.
SHADE
Use in the shade.
DAYLIGHT
Use for fluorescent lighting
with daylight color temperature
D
OVERCAST
Use in overcast conditions
outdoors.
AUTO W/B [PUSH]
Point the camera at a white object and push the MENU SELECT button in to adjust the white
balance automatically (the indicator displays "---" while the white balance is being adjusted).
AWC
The display changes from OK to PUSH once the adjustment is completed normally.
Effective as long as the lighting conditions stays constant. If the adjustment does not
complete normally ("NG" is displayed), change the AE Level and try again.
NEUTRAL
Use for white fluorescent lighting.
N
INCANDESCENT
Use for incandescent bulb lighting.
CANDLE
Use for candlelight conditions.
AUTO W/T
Continually adjusts the white
ATW
balance at appropriate levels.
Use this as the default setting.
15
Advertisement
Table of Contents
