Table of Contents
Advertisement
●
Noticeable video image beat and other noise as well as color disturbances may result when the camera is
operated near sources of strong electrical signal and magnetic fields such as radio and television sets,
transformers, railways and power transmission lines.
●
Insufficient heat dissipation may cause malfuntion. The camera enclosure is being used for cooling. Do not
impede the flow of air around the camera by placing the camera too close to walls, etc.
●
Use extreme caution, make all possible safety considerations, and notify the manufacturer if the camera must
be used under following conditions:
1． Environmental conditions outside operational specification limits and design parameters.
2． Where safety is paramount and significant impact on person or property is anticipated.
●
The manufacturer cannot anticipate every possible circumstances for use of this product. Sufficiently test and
analyze the results for your intended operational conditions and parameters prior to deployment, and use
the camera at your own risk.
●
Design and manufacture of this product were not intended for regulation of equipment or apparatus which is
concerned with sustenance of life （*1） , or the functionality, safety and welfare of the public （ *2） . Please do
not operate this product for such critical purposes.
（*1） ： By "equipment or apparatus concerned with sustenance of life," we mean:
・ Medical equipment such as life-support system and devices used for surgery.
・ Equipment for venting harmful gas, exhaust or smoke.
・ Installed devices required by fire law, building standards and other regulatory acts.
・ Devices equivalent to above.
（*2） ： By "equipment or apparatus concerned with the functionality, safety and welfare of the public," we
mean:
・ Traffic control equipment for air, rail, road and ocean traffic.
・ Nuclear power plant equipment and the like.
・ Devices equivalent to above.
Transportation
● Handle this product with care during transportation. Avoid vibration and shock.
Maintenance
● If you notice dust particles on the image sensor, use commercially available optic air dusters to remove them
gently. Spray-type blowers are not recommended, as water particles may disperse inside the camera. Use
extreme caution when cleaning the sensor.
CMOS Image Sensor and Related Phenomenon
● Phenomenon listed below, which may be visible on recorded images, are common to CMOS image sensors
and are not malfunctions.
・ White Dots
CMOS image sensors are occasionally affected by cosmic rays and other external disturbances, which
manifest themselves as small white dots on the captured image. This is due to the functional
principles of CMOS devices and is not a malfunction. These white dots may become more
pronounced when:
・ the camera is used in hot temperatures.
・ the gain is increased.
・ the shutter speed is decreased.
・ Folded Deformation / Antialiasing
When fine patterns or stripes are captured, you may see patterns and colors which are different
from the actual image.
2
Rechargeable Battery
●
Use only the designated battery, IDX model SSL--JVC50, to ensure trouble-free operation.
●
Battery is not charged when purchased.
Use the designated charger to fully charge the battery prior to initial use.
●
Battery life may become short or the battery may not function normally at low temperatures （below10℃
/50℉） . Try warming the battery in your pocket before use if this happens.
●
Do not subject the battery to excessive heat through exposure to direct sunlight or fire.
●
If you are not going to use the battery for an extended period of time...
①Completely deplte the battery before removing from the camera to prevent battery degradation.
②Fully charge and completely deplete at least once every six months.
●
Store disconnected battery in a cool (approx. 15∼25℃ / 60∼80℉), dry place with the battery contacts
capped for safety.
Other
● Turn the system power OFF for safety and power conservation and remove the battery when not using the
camera for a long time.
Disclaimer
●
We are not liable to you for any damages, including any lost profits, interruption of business, alteration of memory contents,
or other incidental or consequential damages arising out of your use or inability to use this product.
●
We will not be held accountable for lost opportunity or loss of recorded content in the event this camera fails to record for
any reason while being used with a VTR, a hard disk recorder or other recording equipment.
●
Always check camera functionality prior to important recording sessions.
●
We are not responsible for damages due to unforeseen circumstances or causes beyond our control including but not limited
to acts of God, earthquakes, fire, third party actions and use or misuse under abnormal circumstances.
●
We are not responsible for damages caused by use or malfunction of third party equipment (including image processing
boards and lens) or software used with this product.
●
We are not responsible for damages caused by claims of invasion of privacy arising from the use of this product.
●
We are not responsible for damages to the end user's hardware or software caused by use of application and software
provided by us or of the end user's own design.
●
We are not responsible for damages caused by failure to adhere to the instructions in the user's manual.
●
We are not responsible for damages caused by use of this product in a fashion not described in the user's manual.
●
We are not responsible for damages caused by repair attempts and alteration attempts of this product by unauthorized third
parties including the end user and unaccredited repair shops.
●
The amount of liability we may incur in relation to this product under any and all circumstances shall be limited by the
purchase value of this product.
３． Introduction
This camera is an ultra high-sensitivity, high definition video color night vision with video camcorder
form-factor, equipped with a 2.2 million pixel, 2/3" high speed multi-sampling CMOS image sensor.
This product is most suitable for nighttime and low light condition surveillance around international
boarders and ports, and for other specialized applications.
４． Key Features
・ Enables supersensitive color imaging under extremely low-light conditions, down to 0.005 lux.
・ Maintains very good S/N ratio even at high gain settings, with proprietary 2D/3D noise reduction.
・ Proprietary de-fog mode enables clear imaging even in foggy/smoky conditions.
3
Advertisement
Table of Contents
