Altering Parameters - Electrolux MCD3880EM User Manual

Table of Contents

Advertisement

Available languages

Available languages

10
Before first use
Symbol
Grill
Microwave +
grill

Altering parameters

The operating parameters (time, power, temperature) can be altered when the oven is
operating or when the cooking process has been interrupted by proceeding as follows:
1. Select the parameter to be change with the Parameter selection keys. The respective
symbol and the display start blinking.
2. Set the desired value with the '+' and '–' keys.
3. Press the Confirmation key or wait 3 seconds to validate the new parameter value. The
display and symbols stop blinking.
End of a cooking cycle
At the end of the process you will hear three beeps and the display will show the word
"End".
The beeps are repeated every 30 seconds until the door is opened or the Cancel key is
pressed.
Cancelling a cooking cycle
If you wish to cancel the cooking process, press the Cancel key twice.
You will then hear a beep and the time will appear on the display.
Interrupting a cooking cycle
You can stop the cooking process at any time by pressing the Cancel key once or by opening
the oven door.
In both cases:
• Microwave emission is stopped immediately.
• The grill is de-activated but is still very hot. Danger of burning!
• The timer stops and the display shows the remaining amount of operating time.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will be evenly cooked.
2. Change the process parameters.
3. Cancel the process by pressing the Cancel key.
To restart the process, close the door and press the Start key
Function
Microwave
power
---
200W
400W
600W
Grilling food
Toasting food
Grilling poultry and meat
Cooking pies and cheese-topped dishes
Foods

Advertisement

Chapters

Table of Contents
loading

Table of Contents