Yamaha DTXTREME III Service Manual page 51

[Test contents]
Check that operation of the PAD ENCODER is normal using
terminals [qSNARE]̶[tTOM4].
[Test method]
Connect a drum pad with pad encoder (TP100, etc.) to each
terminal [qSNARE]̶[tTOM4] before executing the test.
Press the [ENTER/STORE] button to execute the test.
Turn the rotary encoder of the drum pad clockwise to the fi rst
target value and then turn counterclockwise to the next target
value as indicated on the LCD.
<Example> Indication when turning clockwise for checking
the [qSNARE] terminal.
/ / / / DTXTREME III Test Program / / / /
22 : Pad Encoder :
< >
PadEnc-1 : +8 WAIT
< >
PadEnc-2 : +8 WAIT
< >
PadEnc-3 : +8 WAIT
<Example> Indication when turning counterclockwise for
checking the [qSNARE] terminal.
/ / / / DTXTREME III Test Program / / / /
22 : Pad Encoder :
< >
PadEnc-1 : -8 +0
< >
PadEnc-2 : +8 WAIT
< >
PadEnc-3 : +8 WAIT
[Check item]
Check the test result indicated on the LCD.
[Judgment indication]
In case of OK (If all the inputs are OK):
/ / / / DTXTREME III Test Program / / / /
22 : Pad Encoder : OK
In case of NG (Example: [qSNARE] is NG):
/ / / / DTXTREME III Test Program / / / /
22 : Pad Encoder :
PadEnc-1 :NG
< >
PadEnc-2 : +8 WAIT
< >
PadEnc-3 : +8 WAIT
< >
PadEnc-4 : +8 WAIT
< >
PadEnc-5 : +8 WAIT
< >
PadEnc-4 : +8 WAIT
< >
PadEnc-5 : +8 WAIT
< >
PadEnc-4 : +8 WAIT
< >
PadEnc-5 : +8 WAIT
In case of NG (If any input is NG):
/ / / / DTXTREME III Test Program / / / /
22 : Pad Encoder : NG
[MIDI code output for judgment result]
OK: A0 16 02
NG: A0 16 03
[How to quit test]
MANUAL MODE:
In case of OK, press the [INC/YES] button to proceed to the
next test.
If the test is aborted with the judgment of NG, press the
[EXIT] button to return to the "Test number selection screen".
MIDI MODE:
Send a test code for another test to stop the current test and the
test for the newly sent test code will be executed.
Press the [EXIT] button to return to the "MIDI test code
standby screen".
23. HiHat
Standard stereo phone cable
RHH135
Press: MAX.
Release: MIN.
[ HI-HAT
CONTROL ]
[Test Code]
A0 17 00
[Initial indication]
/ / / / DTXTREME III Test Program / / / /
23 : HiHat : Press [ENTER]
[Test contents]
Check that operation of the hi-hat controller is recognized
normally.
[Test method]
Press the [ENTER/STORE] button to execute the test.
Connect a hi-hat controller (RHH135, etc.) to the [HI-HAT
CONTROL] terminal and MIN value of the controller can be
recognized normally.
DTXTREME Ⅲ
[ HI-HAT
CONTROL ]
51