Yamaha DTXTREME III Service Manual page 48

DTXTREME Ⅲ
[Test method]
Press the [ENTER/STORE] button to execute the test.
Turn the rotary encoder clockwise and counterclockwise
following the indication on the LCD.
・Indication when rotating clockwise for checking
Turn clockwise by 8 clicks and the test for counterclockwise
rotation will be started automatically if the result is OK.
/ / / / DTXTREME III Test Program / / / /
04 : Encoder :
・Indication when rotating counterclockwise for checking
Turn counterclockwise by 8 clicks and the test is completed if
OK is indicated.
/ / / / DTXTREME III Test Program / / / /
04 : Encoder :
[Check item]
Check that the value at right in the screen changes when the
encoder is turned.
[Judgment indication]
In case of OK:
/ / / / DTXTREME III Test Program / / / /
04 : Encoder : OK
In case of NG: None
[MIDI code output for judgment result]
OK: A0 04 02
NG: None
[How to quit test]
MANUAL MODE:
In case of OK, press the [INC/YES] button to proceed to the
next test.
48
< >
+8 +0
< >
-8 +0
MIDI MODE:
Send a test code for another test to stop the current test and the
test for the newly sent test code will be executed.
Press the [EXIT] button to return to the "MIDI test code
standby screen".
05. Slider
[Test Code]
A0 05 00
[Initial indication]
/ / / / DTXTREME III Test Program / / / /
05 : Slider : Press [ENTER]
[Test contents]
Move the slider (slide volume) and check for operation.
[Test method]
Press the [ENTER/STORE] button to execute the test.
As a slider name is shown on the screen, move each slider
upward and downward between top and bottom.
Check that the value on the screen changes 0 (or 1)̶127 (or
126) and that OK is displayed.
* The [MASTER] and [PHONES] are not checked in
this test.
yyy:
Target value
/ / / / DTXTREME III Test Program / / / /
05 : Slider :
Slider-CLICK
Slider-ACCOMP
Slider-KICK
Slider-SNARE
/ / / / DTXTREME III Test Program / / / /
05 : Slider :
Slider-TOMS
Slider-CYMBAL
Slider-HIHAT
Slider-MISC
[Check item]
Check the value and test result on the LCD.
xxx:
Current value
< >
: yyy xxx
< >
: yyy xxx
< >
: yyy xxx
< >
: yyy xxx
< >
: yyy xxx
< >
: yyy xxx
< >
: yyy xxx
< >
: yyy xxx