Download Print this page

MTD Troy-Bilt TB 360 Fast Start Manual page 2

Advertisement

6
Pour the entire contents of the oil bottle (supplied)
into the oil fill. Check the oil level using the
dipstick. (Refer to the Operator's Manual)
7
Fill fuel tank with clean, fresh gasoline. Do not
fill above the base of fuel tank neck.
© 2015 12ABD3B
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
Oil Fill /
Dipstick
Gas Fill
Spark Plug Boot
Need Help? Call 1-888-TO-HELP-U
Make sure the spark plug boot is connected to
the spark plug before attempting to start.
While standing behind the machine, pivot the Blade
Control Handle against the premium drive control.
Grasp the starter rope handle and pull with quick,
full-arm stroke. If the engine does not start after three
pulls, wait a few minutes and repeat.
8
9
778-13238B

Advertisement

loading