Starting Voice Recognition - Hyundai Santa Fe User Manual

Before starting voice recognition
• The system can recognize only specified voice
commands.
> See p.7-7 "Available voice commands" or the
on-screen help of the voice recognition.
• To increase the recognition rate, keep in mind the
following when saying a voice command:
- Say a command naturally and clearly.
- Say a command in the direction of the microphone,
keeping your body straight in the driver's seat. The
microphone is located at the top part of the inside
rearview mirror.
• Voice recognition will end automatically in the following
situations:
- When a call comes in or when you make a call
- When you connect or remove a media storage device
- When the front view or rear view camera turns on (*if
equipped)
- When you start another function by pressing a button,
such as the [RADIO] or [MEDIA] button.
- When an unintentional function is performed, such as
a new route search when you deviate from the route
during navigation.
7-2
• Voice recognition will be affected by the ambient noise in
the following situations:
- When a window or the sun roof is open, causing a
loud sound made by the wind
- When the air conditioner or heater is set to a high air
volume level (level 3 or lower is recommended)
- While you are driving through a tunnel
- When severe vibrations and noises occur while driving
on a unpaved or uneven road
- When severe noises occur due to heavy rain or a storm

Starting voice recognition

With voice recognition, you can use your system's functions
without controlling the screen or buttons. This can help
you maintain focus while driving and avoid any dangerous
situations.
Use voice recognition to perform functions safely and
conveniently.