Passthrough warewasher c/w heat recovery unit (16 pages)
Summary of Contents for Washtech PW2C
Page 1
PW2C WIDE BODY FRONT LOADED WAREWASHER C/W HEAT RECOVERY UNIT OPERATOR MANUAL...
Page 2
Information supplied in this manual is copyright. No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical without the express permission of the author / publisher. 21/11/2018 Washtech PW2C Operator Manual...
Installation and servicing must be carried out by a suitably qualified person in compliance with all local codes and standards including AS/NZS 3500.1. 21/11/2018 Washtech PW2C Operator Manual...
• Pressure: no greater than 350 kPa NOTE: If above 350kPa fit pressure limiter valve (LPV). Do not use small diameter plastic supply lines. • Backflow prevention: Atmospheric Vacuum Breaker (AVB) fitted standard. • Watermark Certification #08603. 21/11/2018 Washtech PW2C Operator Manual...
Page 7
We recommend consulting your local authority to ensure your site remains compliant. Installation Checklist • Complete attached Installation Checklist to ensure machine is installed and running correctly, and operator is familiar with operating procedures. 21/11/2018 Washtech PW2C Operator Manual...
USE LONG CYCLE WHERE POSSIBLE DRAINING THE MACHINE DRAIN THE MACHINE DAILY SHUT-DOWN AND DAILY CLEANING CHECK WASH ELEMENTS HAVE COOLED BEFORE CLEANING WEEKLY MAINTENANCE FULL MACHINE CLEAN INCLUDING WASH/RINSE ARMS PLANNED SERVICNG IMPORTANCE OF HAVING MACHINE SERVICED REGULARLY 21/11/2018 Washtech PW2C Operator Manual...
Cycle lengths can be adjusted by a qualified service agent accessing the WI-200 Electronic timer. For adjustment instructions refer to the adjustment section of the Service Manual for the model or the WI-200 Service Manual. 21/11/2018 Washtech PW2C Operator Manual...
Scrape and/or rinse trays, plates & glasses in cool water. Chemical Use a good quality non foaming commercial detergent and drying agent – do not use domestic detergents which will cause the wash tank to foam. 21/11/2018 Washtech PW2C Operator Manual...
** For issues that are likely due to poor water quality (scale building up, filters being required on other kitchen equipment etc..), we recommend you consult a local water specialist prior to calling in a dishwasher technician. IF PROBLEMS PERSIST CONTACT MOFFAT SERVICE ON 1300 264 217 21/11/2018 Washtech PW2C Operator Manual...
Page 14
• Left Wash Pump Inlet Hose C200359 • Left Wash Pump Outlet Hose 61941 140mm • Right Wash Pump Outlet Hose 200315C • Right Wash Pump inlet Hose 61942 80mm • Break Tank Hose 400 10361 21/11/2018 Washtech PW2C Operator Manual...
Page 15
• Temperature Gauge Probe Clamp 400 20066 • Wash Arm Assembly 815 10007 • Wash Arm Bush 190621C • Wash Arm End Screw 600 80072 • Wash Pump Inlet Filter 352 10026 • Wash Spindle AL 400 30362 21/11/2018 Washtech PW2C Operator Manual...
Page 16
ISO9001 quality management system, covering design, manufacture and final inspection, ensuring consistent high quality at all times. In line with policy to continually develop and improve its products, Washtech Ltd reserves the right to change specifications and design without prior notice.