Advertisement
Advertisement
Related Manuals for Washtech Starline UD
Summary of Contents for Washtech Starline UD
- Page 1 Operator Manual...
-
Page 2: Table Of Contents
• tel (03) 9518 3888 • Fax (03) 9518 3818 • Web www.moffat.com.au Service 0800 782 754 m2 High performance passthrough Dishwasher - Operator Manual Parts 09 829 0930 Manufactured in New Zealand by Washtech Ltd. 414 Rosebank Road, Avondale, Auckland 1026. PO BOX 90548, Auckland 2 UD - Operator Manual 170323... -
Page 3: Safety Instructions
Safety Instructions WARNING Equipment contains dangerous voltages and can be hazardous if installed or operated WARNING incorrectly. non-compliance with warnings or failure to follow the instructions Before installation and commissioning, you must read the safety instructions contained in this manual can result in loss of life, severe personal injury or serious and warnings carefully and all the warning labels attached to the equipment. - Page 4 Installation Checklist WARNING WARNING Installer must be suitably qualified and ensure compliance with all codes and standards Before installation and commissioning, you must read the safety instructions including AS/NZS3500.1. and warnings carefully and all the warning labels attached to the equipment. Unpack IMPORTANT •...
-
Page 5: Installation Diagram
UD Installation Diagram UD8S INST 29-02-16 3A 5 UD - Operator Manual 170323... - Page 6 UD Operating Instructions START POWER DOWN START • Turn on at wall • Ensure the Scrap tray (3) is in place • Ensure the Upstand (1) and Drain filter (2) is in place and shut door • Press Power button for 3 seconds to turn machine on and begin the fill cycle OPERATION •...
- Page 7 User Programming The User Settings menu is accessed by pressing the UP and DOWN keys simultaneously for 5 seconds, the screen should then change to: POWER DOWN Press the POWER button to scroll between settings. Press the UP and DOWN keys to change a specific setting, Press the START button to return to the operator screen.
-
Page 8: Troubleshooting
Troubleshooting If an error message appears on the control display first try turning the machine OFF for 30 seconds and then back ON. If the error message remains call for service. Issue Resolution Error 7 Fill failure - check drain upstand is fitted & water supply is turned on and good flow rate Error 8 Drain failure - check drain upstand is removed &... -
Page 9: Wiring Diagram
UD8(S) Wiring Diagram UD8(S) WIRING DIAGRAM 030323 14/03/17 3C IMPORTANT 9 UD - Operator Manual 170323... - Page 10 Number PROCESS SHEET PS PACK0103 PAGE 1 OF 1 Accessories 29/02/16 ISSUE NO. REVISION DATE APPROVED BY: OPERATION STARLINE UD8 DISHWASHER ACCESSORIES QTY CHECKED 600 70029 CUPRACK CB 500mm X 75mm high 600 70028 DISHRACK P12/18 500mm 18 DISH C660503 CUTLERY CONTAINER G 600 60080 HOSE SS 2M...
- Page 11 Parts Description Part No. Cabinet & Door Door Catch Plunger Assembly 400 10104 Door Seal Gasket (540mm) 600 90064 Controls & Indicators Digital Temperature 1000mm 600 30430 Door Reed Switch 600 30183 WI200 Controller PCBA 600 40081 WI200 Keypad Membrane 400 70160 WI200 LCD Interface PCBA 600 30420...
-
Page 12: Information Supplied In This Manual Is Copyright. No Part Of This Work May Be Reproduced Or Copied In Any Form Or
No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical without the express permission of the author/publisher Manufactured in New Zealand by Washtech Ltd. 414 Rosebank Road Avondale Auckland 1026...