Waterpik Waterflosser WF-02 Quick Start Manual

QUICK START GUIDE
1
FIRST USE
1. Remove reservoir.
4. To replace battery
door, line-up arrows,
push
and
twist.
3
LEAN OVER SINK
Close lips enough to
prevent splashing, while
still allowing water
to flow from mouth
into the sink.
Model WF-02
2. To remove battery
door, twist, and pull.
5. Insert tip
firmly until
it clicks into
place.
Insert
4
TECHNIQUE
Aim water at the gumline
at a 90° angle. Follow the
gumline and pause briefly
between teeth.
Review full instruction book prior to first use
3. Insert 3AA batteries.
Included
6. Fill reservoir with
warm water.
2
START WATER FLOSSING
TO AVOID MESS: PLACE THE
TIP IN YOUR MOUTH BEFORE
TURNING UNIT ON
Slide power switch to low(l)
or high(ll) position. Start
with lowest setting and
increase to your liking.
5
Register your product and
receive over $30 in savings.
waterpik.com/registration
© 2017 Water Pik, Inc.
1.800.525.2774 (USA)
English