Table of Contents
Advertisement
7. Secure the tip with the thumb and forefinger of one hand and use your
other hand to turn the alignment ring clockwise. Keep turning the ring until
its leading edge contacts the mirrored viewing tip, locking it in place. The
pair of figures below illustrate the incorrect (left) and correct (right)
orientation of the mirror with respect to the LEDs.
Remove the blue circular protective film from the mirror by pulling on its tab
with a tweezers.
SPECIFICATIONS
Probe Length, Type:
Camera Head Diameter, Type
Camera Head Diameter
with Thread Protector:
Camera Head Length:
Camera Resolution:
Camera Depth of Field:
Camera Field of View:
Camera Lighting:
Operating Temperature:
Dimensions of Probe Handle:
Weight of Handle and Probe:
8
1m, 2m or 3m (3.3 ft., 6.6 ft. or 9.8 ft.),
Flexible-obedient
0.22 in. (5.5mm), Stainless steel
0.23 in. (6mm)
0.78 in. (20mm)
VGA (640 x 480 pixels)
0.4 to 12 in. (10 to 300mm)
60° (diagonal)
4 forward-facing LEDs
+ 2 side-facing LEDs
-4° to 150°F (-20° to 65°C)
5.47 x 1.38 x 1.26 in. (139 x 35 x 32mm)
7.76 oz. (220g)
5
Advertisement
Table of Contents
