IBM 3742 Reference Manual page 82

Code Type Causes What To Do
Q Field totals No
"<"
sign was found in the first Reset and rewrite the control statement.
(continued) position of any program buffer.
R Right adjust Data key was pressed after the right Reset and press RIGHT ADJ or FIELD
adjust field was filled. skSP and reenter field.
Data key was pressed after all Reset and press RIGHT ADJ.
characters have been verified.
A mismatch occurred on atill char- Reset and correct the program.
acter for a right adjust field
RIGHT ADJ or - (dash) was pressed Reset and, if the dash and RIGHT ADJ are
at the start of a field that isn't all fill correct, do field correct.
characters or contains the wrong
type of fill character. The error
occurs when the first non-fill
character is encountered.
RIGHT ADJ or dash (-) key was Reset and correct field;
pressed before all characters in the
field have been verified.
S
Search The mask didn't match any record Reset and inspect search mask and data set
during a search on content or search
label.
on sequential content operation.
T Truncation Attempt was made to enter data
Reset and backspace or advance to next
beyond the logical record length.
record.
RIGHT ADJ was pressed at the end
Reset and advance to next record or back-
of the record. space to field with in record.
DISPLAY PROD STAT was pressed Reset, return to index, and inspect label.
in enter (E) mode and the record
length is less than 21.
U Printer
Printer has run out of forms or the Reset and check forms.
hardware has failed.
76
JI