IBM 3742 Reference Manual page 78

Code
Type
Causes
What To Do
D Disk 2 not ready The disk 2 drive isn't ready when
Reset and make disk 2 ready.
disk 2 R EC ADV is pressed.
E End of extent Attempt was made to read from disk
Reset and continue on another data set or
2 beyond the last record in the data disk.
set.
Attempt was made to record advance Reset and modify EOE in label.
on disk 1 beyond EOE.
The disk has been positioned on the
Reset.
index track after the last record in
the data set has been verified.
EOE was encountered on disk 1 during Reset and modify EOE in label or continue
copy operation.
on another disk.
F Function not
The selected function isn't available.
Reset and rekey FUNCT SEL and appropriate
available key or keys for desired function.
The second disk setup is improper. Prepare second disk.
G Write protect Enter (E) or verify (V) mode is
Reset and inspect label.
selected with the data set protected.
Attempt was made to write on the Reset, return to index, and inspect label.
disk in update mode with the data
set protected.
At last record in data set in update
Reset and inspect label.
(U) mode and attempt was made to
record advance with the data set
protected.
H Copy setup After pressing COPY:
- The disk 2 address is less than
Reset and advance to proper disk 2 address.
track 00, sector 08.
- Disk 2 isn't ready
Reset and press DISK 2 RETURN TO INDEX.
- COpy wasn't pressed in conjunc-
Reset and press the numeric shift key in
tion with the numeric shift key.
conjunction with COPY.
Disk 1 is on track 00, but disk 2
Reset and press DISK 2 RETURN TO INDEX.
isn't on track 00.
Then position disk 2 to the correct label.
SEARCH SEQ CONTENT was Reset and select proper function.
(
pressed in copy setup.
72