IBM 3742 Reference Manual page 79

Code Type Causes What To Do
Search address
The search address contains a non- Reset and enter the correct address.
decimal character or the third posi-
tion is non-zero.
The search address isn't within Reset and enter the correct address.
the extents of the data set.
J Print to EOD EOD was encountered on current Reset and insert next disk in sequence.
data set and the data is continued
on another disk.
K Keying Uppershift A or Z was pressed.
Reset and press the correct key.
PROG NUM SH I FT is set to Reset and press the correct key or set
numbers only and in program
PROG NUM SHIFT to all characters.
numeric field and the character
keyed isn't 0 through 9, dash, space,
plus.
One of the two keys pressed Reset and press the hex key and the
following the hex isn't a hex two hex characters.
character.
l
Incorrect SCRl FWD, SCRl BKWD,
Reset and press appropriate key.
function
CHAR ADV, or FIELD ADV was
pressed in verify (V) mode.
REC BKSP or REC ADV was pressed
Reset and press appropriate key.
in field correct (C) mode.
DISPLAY PROD STAT was pressed
Reset and select appropriate function.
when not on track 00 or in enter
(E) mode.
M
Mode selection Search, offl ine field totals, print Reset and reselect correct mode.
to EOD, or copy was attempted from
verify (V) or field correct (C) mode.
Copy was attempted from update (U) Reset and reselect correct mode.
mode.
Search on content was attempted Reset and reselect correct mode.
from enter (E) mode.
Enter (E), modify index (M) or
Reset and reselect correct mode.
initialize
(I)
mode was attempted
from other than index (X) mode.
Error and Alert Codes 73