Setting Spoof Pins; Adjt_St The Presser Foot Lever; Thread Cutter - Kenmore 385.12514 Owner's Manual

SECTION 2. PREPARE THE MACHINE FOR SEWING
= Setting Spool Pin • Adjust the Presser Foot Lever
f -_ f
t
The spool pins are used for holding the
spools ol thread when teeding thread tothe
machine.
To use, puli up the spool pins. Push down for
storage.
lever
The Presser Foot Lever raises and lowers your
presser toot.
You can raise it about 1/4- higher than the normat
up position tor easy removal of the presser foot or
to help you place heavy fabrics under the presser
toot.
• Thread Cutter
/"
Thread cutter
\
\
You don't need a pair ot scissors to cut the
thread after you finish sewing. Just use the
handy thread cutter.
Pull the threads to lengthen several inches
betore starting the next seam.