Kenmore 17830 Owner's Manual page 44

BU_ONHOLE MAKING - BUiLT-iN SY_EM
0
SNp_ 11t, m
$
©
PREPARATION
Carefully mark the buttonholo length _ your
gaunt. Place tfle fabric with tho buttonhole
marked under the buttonhole foot. PuB the
guide foot (A) all the way forward so that the
irndexmark (B| is eltgnedwlth the grlidual_n
(C), with th_ to rear. (Repreduc_ton of trm
identical size buttonholes is facilitated with
the aid of the graduations on both iddes of
the buttonhole guide foot, T_ graduations
are 1/8" (left eide) or 2.!5 mm |dght side)
apart. Graduations act as reference mark,)
footl
PROCEDURE
i, Switch the control to left. (If it is elready
at left, ut it at right, sew severel stitches
and switch to left again before you etart
to m buttonh_.} Step on foot control
to form first bartack end left side of
buttonhole,
®
2. When you reach end of left _dde0 switch
the control to the right end complete the
buttonhole.
43