Download  Print this page

Software; Update Software; Software Version - Philips 5813 series User Manual

Smart tv ultra slim full hd led.
Hide thumbs

Advertisement

2

Software

2.1

Update Software

Search for Updates
Update from Internet
 (Home) > Settings > Update software > Search
for updates > Internet
Look for a software update yourself.
• If the TV is connected to the Internet, you may
receive a message to update the TV software. You
need a high-speed (broadband) Internet
connection. If you receive this message, we
recommend you to carry out the update.
• During the software update, there is no picture and
the TV will switch off and on again. This might happen
several times. The update can take a few minutes.
• Wait until the TV picture comes back up. Do not
press the power switch  on the TV or on the
remote control during the software update.
Update from USB
 (Home) > Settings > Update
software > Search for updates > USB
• You need a computer with a high-speed Internet
connection and a USB memory device to upload the
software on the TV.
• Use a USB memory device with 512MB free space.
Make sure that write protection is switched off.
1 - Start the update on TV
Select Update software > Search for updates >
USB, then press OK.
2 - Identify the TV
Insert the USB memory into one of the USB
connections of the TV.
Select Start and press OK. An identification file is
written on the USB memory device.
3 - Download the TV software
- Insert the USB memory into your computer.
- On the USB memory device, locate the
file update.html and double click it.
- Click on Send ID.
- If new software is available, download the .zip file.
- After the download, unzip the file and copy the
file autorun.upg onto the USB memory device.
- Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again. The update
starts automatically.
The TV switches itself off for 10 seconds and then
back on again. Please wait.
Do not . . .
• use the remote control
• remove the USB memory device from the TV
• press
twice
• press the power switch on the TV
The TV switches itself off (for 10 seconds) and then
back on again. Please wait.
The TV software has been updated. You can use the
TV again.
To prevent an accidental update of the TV software,
delete the autorun.upg file from the USB memory
device.
Local Updates
 (Home) > Settings > Update
software > Search for updates > USB > Local
updates.
For dealers and expert users.
2.2

Software Version

 (Home) > Settings > Update
software > Current software Info
To view the current TV software version.
4

Advertisement

Table of Contents

   Also See for Philips 5813 series

   Related Manuals for Philips 5813 series

This manual is also suitable for:

43pfg581332phg5813

Comments to this Manuals

Symbols: 0
Latest comments: