FULL ONE YEAR WARRANTY
If this Craftsman Router fails to give complete satisfaction within one year from the date of purchase, RETURN IT
TO THE NEAREST
SEARS STORE IN THE UNITED STATES, and Sears will repair it, free of charge.
If this Craftsman Router is used for commercial or rental purposes, this warranty applies for only 90 days from the
date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., DEPT. 817 WA, Hoffman Estates, IL 60179
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their
with them, deserve your careful attention and understanding.
The safety warnings
do not by
themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident
SAFETY ALERT SYMBOL:
Indicates caution or warning. May be used in conjunction with other symbols or pictographs.
WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others. Always
follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
CAUTION: Failure to obey a safety warning may result in property damage or personal injury to yourself
or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal
Advises you of information or instructions vital to the operation or maintenance of the equipment.
DOUBLE INSULATION is a safety concept in electric power
tools which eliminates the need for the usual three wire
grounded power cord and grounded supply system. Wherever
there is electric current in the tool there are two complete sets
of insulation to protect the user. All exposed metal parts are
isolated from internal metal motorcomponents
- Servicing of a tool with double insulation
requires extreme care and knowledge of the system and
should be performed only by a qualified service technician.
For service we suggest you return the tool to your nearest
Sears Store for repair. Always'use originalfactory replacement
parts when servicing.
Your router has a precision built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only
(normal household current), Do not operate this tool on direct current (DC). A voltage drop of more than 10 percent will
cause a loss of power and the motor will overheat. If your tool does not operate when plugged into an outlet, double-check
the power supply.
Look for this symbol to point out important
It means attention!!!
Your safety is involved.