Honeywell Stryker VAV Operating Manual page 30

STRYKER VAV ZIO CONFIGURATION
Display
AO_1 Analog output 1
AO_2
dO_1 Binary output 1
dO_2
dO_3
dO_4
-- None
NOTES:
1. If you select dO_1 or dO_2, verify that
Float_2_TRVL_SEC =0. This frees dO_1 & dO_2
from internal links to Float_2.
2. If you select dO_3 or dO_4, verify that
Float_1_TRVL_SEC =0. This frees dO_3 & dO_4
from internal links to Float_1.
Configure Auxiliary Relay pulse OFF [nciLogicalOutVav,
AuxPlsOff]
Display
AO_1 Analog output 1
AO_2
dO_1 Binary output 1
dO_2
dO_3
dO_4
-- None
NOTES:
1. If you select dO_1 or dO_2, verify that Float_2-
TRVL_SEC =0. This frees dO_1 & dO_2 from
internal links to Float_2.
2. If you select dO_3 or dO_4, verify that Float_1-
TRVL_SEC =0. This frees dO_3 & dO_4 from
internal links to Float_1.
63-2730—01
Description
Description
Configure Fan Binary control [nciLogicalOutVav, FanDig]
Display
AO_1 Analog output 1
AO_2
dO_1 Binary output 1
dO_2
dO_3
dO_4
-- None
NOTES:
1. If you select dO_1 or dO_2, verify that
Float_2_TRVL_SEC =0. This frees dO_1 & dO_2
from internal links to Float_2.
2. If you select dO_3 or dO_4, verify that
Float_1_TRVL_SEC =0. This frees dO_3 & dO_4
from internal links to Float_1.
Configure Fan Modulating control [nciLogicalOutVav, FanMod]
Display
AO_1 Analog output 1
AO_2
FL_1 Floating output 1 (DO3, DO4)
FL_2 Floating output 2 (DO1, DO2)
30
Description
Description