Buffalo LinkStation 500 User Manual page 38

4
Click Delete.
5
Two different warnings will be displayed. Read them carefully and click Yes for both.
6
From the Drives tab, select the drive and click Format.
7
Select the file system from the drop-down menu and click Format.
8
When the format is finished, click OK, then Close.
9
To format another drive, repeat steps 5 to 7.
Once JBOD is configured, the default shared folders will automatically be created only on the drive that is initially
formatted. Create shared folders on the other drives, referring to the "Folder Setup" section in chapter 7 for the
procedure.
37