Philips CM-150 CA Manual page 4

CM-150 CA, Surface Mount Specifications
Due to continuous improvements and innovations, specifications may change without notice.
Item Specification
Input Voltage
Power Consumption
Electrical
Power Output
Fuse
Data Input Source
Power Input
Connections
Data Input/Output
Power/Data Output
(To luminaire)
Dimensions
(Height x Width x Depth)
Weight
Housing Material
Mounting
Physical
Temperature Ranges
Humidity
Cooling
Certification
Certification
and Safety
Environment
† Terminal block connectors accept wire sizes from 0.5 to 2.1 mm
‡ IDC connectors accept wire sizes from 0.326 to 0.129 mm
4
CM-150 CA Product Guide
7.5/12V 24V
7.5 VDC or 12 VDC 24 VDC
3 W at 7.5 VDC or 12 VDC 3 W at 24 VDC
60 W maximum at 7.5 VDC, or
150 W maximum at 24 VDC
96 W maximum at 12 VDC
(2) 5 A, fast-blow fuses (2) 4 A, fast-blow fuses
Philips Color Kinetics full range of controllers, including Light
System Manager, Video System Manager Pro, iPlayer 3, Antumbra
iColor Keypad, and ColorDial Pro, or third-party controllers.
V+ and GND terminal block
†
Double-pair, double-entry IDC connectors
(2) three-pin panel mount connectors, or
(2) four-pin panel mount connectors
208 x 90 x 39 mm (8.2 x 3.5 x 1.5 in)
0.7 kg (1.6 lb)
Die-cast aluminium, powder-coated finish
Surface mountable
-20 to 50 °C (-4 to 122 °F) Startup
-30 to 50 °C (-22 to 122 °F) Operating
-40 to 80 °C (-40 to 176 °F) Storage
0 to 95%, non-condensing
Convection
UL/cUL, CE
Dry/Damp/Wet Location, IP66
(14 to 20 AWG).
2
(22 to 26 AWG).
2
‡
208 mm (8.19 in)
184 mm (7.24 in)
198 mm (7.8 in)