Configuration (Advanced); Prg (Programme Selection); Avan(Advance); Spres (Express) - Primer LS-11 P User And Maintenance Manual

To go to the menu, while the machine is on and
stopped, press the INC and DEC (,) keys together
for 2 seconds. The two main menus of the machine
are shown below.
 Configuration
CONF
 Maintenance
MANT
The maintenance menu is exclusively for use
by the technical service, user options are included in
the configuration menu. To go to configuration, press
START and enter the code, 3489. The different options
are displayed below:
 Model (technical service)
MOD.
 Temperature unit (Cº or Fahrenheit)
Grd
 Self-service (Off/Coin/CP) Only for
Pay
self-service models (see point 2.9)
 Programme selection
Prg
 Advance (On/Off)
AVAN
 Express (On/Off)
SPRES
 Extra rinse (On/Off)
ACLA
 Thermal stop switch (On/Off)
Stop
 Configuration of water level
LEuL
 bLOC (Modify/delete blocks)
bLOC
 Remaining time
TimR
 Currency (only self-service/coin
Div
slot) (see point 2.9)
 Price (only self-service/coin slot)
Pric
(see point 2.9)

3 CONFIGURATION (advanced)

3.1

Prg (programme selection)

Press start to access the programme selection; the
programmes are displayed followed by 'y' or 'n'
(yes/no) indicating which programmes are activated.
Use the INC () and DEC () keys to change the
yes/no, press >> (advance) to change the programme
and Start to end. If no programme is selected, the
defect programme, P1 is active. If, for example,
programmes P1, P4, P5, P8 and P14 are selected,
correlative numbers are displayed on the operation
screen: P1, P2, P3, P4, P5.
3.2

AVAN(advance)

The key >> can be deactivated, to prevent the
advance of a cycle thus ensuring the wash programme
is completed correctly. ON activated, OFF deactivated
(activated by defect)
3.3

SPRES (Express)

The Express function may be switched off. This
function slightly alters the wash cycles and times to
give shorter cycles. ON activated, OFF deactivated
(activated by defect)
3.4

ACLA (Extra rinse)

The extra rinse key can be switched off, eliminating the
option to add an extra rinse. ON activated, OFF
deactivated (activated by defect)
3.5

Stop (Thermal stop switch)

When the thermal stop switch is activated, the cycle
time does not start until the programmed temperature
has been reached in order to guarantee the wash
cycle is correctly completed; this switch can be
deactivated so that the time is counted from the
moment the programmed level is reached. ON
activated, OFF deactivated (activated by defect)
3.6

LEuL (Configuration of levels)

The water levels can be varied; there are three
different settings:
1- Low (factory setting)
2- Intermediate
3- Height
If the configuration is modified, this will affect all the
levels of water used. Press start and the current level
is displayed (Leu1), use the INC and DEC (,) keys
to change the level to suit your needs. Press Start
again to confirm the level selected.
9
ENGLISH