Use; Controls; Programmes - Primer LS-11 P User And Maintenance Manual

2.1

Controls

Screen (2)
Mains switch (4) On/Off
START key
ADVANCE (>>) key
INC ( ) and DEC ( ) keys
EXPRESS Key
Extra Rinse Key
Phase indicators (LEDS)
2.2

Programmes

(S) Express mode on
Programme
Whites 90ºC
P1 (S)
Whites/coloureds 60 ºC
P2 (S)
Whites/coloureds 30 ºC
P3 (S)
Whites/coloureds cold wash
P4 (S)
Synthetics 60ºC
P5 (S)
Synthetics cold wash
P6 (S)
Delicates 40ºC
P7 (S)
Delicates cold wash
P8 (S)
Cold woollens
P9 (S)
Sanitary
P10 (S)
Fast cold wash
P11 (S)
Fast wash 40ºC
P12 (S)
Fast wash 60ºC
P13 (S)
Fast delicates
P14 (S)
Long spin
P15 (S)
Short spin
P16 (S)
NOTE:
When the thermal stop is deactivated, the programmed wash time starts to run immediately without waiting for the programmed water
temperature to be reached

2 USE

The screen has 4 displays with 7 segments each and gives information regarding
the current operation.
The switch has two positions. Press "I" to switch on the washing machine and "O" to
switch it off.
Press Start to start a programme, pause or continue the programme after the
pause. In the menu navigation use the ENTER function to enter or go the next level
in a menu.
Press advance to accelerate a programme. When this key is pressed the
programmer goes directly to run the next phase of the programme; where the phase
currently running is the last, the programme ends. Please note that if you press this
key during a spin cycle, the machine will not move to the next phase until
completion of the required safety time to permit the drum to come to a complete
standstill.
The INC () and DEC () keys have different functions depending on the screen
and the programmer operating mode. Use these keys to select a wash programme
or to scroll through different menus.
Press Express to reduce the time each programme runs. The following table shows
the effect of the "express" key on the different programmes.
When the Express key is pressed, the letter S appears next to the programme,
indicating that the express mode is on.
When scrolling through the menus, use the Return function to exit or go to the
higher level.
Press this key to add an additional rinse to the current washing programme. When it
is pressed, the additional Extra Rinse LED lights up.
The programmer has 7 amber LEDs that indicate the status of the washing machine
and the washing programme progress in its different phases. The eighth LED is
green and shows the door status.
The complete prewash cycle is cancelled and the wash cycle lasts 8
minutes instead of 12.
The complete prewash cycle is cancelled and the wash cycle lasts 10
minutes instead of 15.
The complete prewash cycle is cancelled and the thermal stop is
deactivated in the wash cycle
The complete prewash cycle is cancelled.
The complete prewash cycle is cancelled and the wash cycle lasts 10
minutes instead of 15.
The complete prewash cycle is cancelled.
The complete prewash cycle is cancelled and the thermal stop is
deactivated in the wash cycle
The complete prewash cycle is cancelled.
The complete prewash cycle is cancelled and the wash cycle lasts 8
minutes instead of 12.
There is no change.
There is no change.
There is no change.
There is no change.
There is no change.
There is no change.
There is no change.
"Express" Effect
7
ENGLISH