Related Manuals for Olympus InstaClear
Summary of Contents for Olympus InstaClear
- Page 1 INSTACLEAR Setup and Operation Quick Reference Guide This setup guide is only a summary of the InstaClear Instructions for Use (IFU). For detailed operating instructions, be sure to follow the InstaClear IFU that was included with your device when purchased.
- Page 2 Attach power cord 3 | Power On Turn the InstaClear system on by pressing the power button at the lower left corner on the front of the console. The power switch will illuminate. Turn the...
- Page 3 4 | Connect Foot Pedal Align the foot-pedal plug and foot-pedal socket (on the rear of the console) and insert the plug fully into the socket. 5 | Assemble Endoscope in Sheath Grasp the sheath by the hub and slide it over the end of the scope, hub end first, until it stops at the distal end (a slight gap is appropriate between the sheath hub and the light post).
- Page 4 Unhook the tube set from the sheath. Slide the sheath distally off the endoscope to disassemble and dispose of the sheath. Press the pinch-valve button on the InstaClear console and remove the blue tubing from the pinch valve. Open the pump lever and remove the tubing from the pump.