Sony DSX-A310DAB Operating Instructions Manual page 8

Receiving stored services
1
After selecting the desired band, press a
number button (1 to 6).
Searching for a service by name (Quick-
BrowZer™)
You can display a list of services for easy searching.
1
During DAB reception, press
The unit enters Quick-BrowZer mode, and the
list of services appears.
2
Rotate the control dial to select the
desired service, then press it.
Reception starts.
To exit the Quick-BrowZer mode
Press (back).
Setting DAB announcements
If you enable DAB announcements, DAB
announcements can interrupt the currently
selected source.
1
Press MENU, rotate the control dial to
select [GENERAL], then press it.
2
Rotate the control dial to select [SET
ANNOUNCE], then press it.
3
Rotate the control dial to select [SET
ANNC-ON] or [SET ANNC-OFF], then press
it.
Note
During a DAB announcement, the volume is adjusted to
the level set for TA in RDS (page 9).
8
GB
To listen to the same or similar program
even during weak reception
Set [SET SOFTLINK] to [ON] (page 14).
[FM-LINK] lights up when the corresponding FM
program is being received.
"Hard Link" follows the same program, and "Soft
Link" follows a similar program.
SOFT
LINK
(browse).
OFF
ON
Updating the service list automatically
(Auto scan)
1
Press MODE to select [DB1], [DB2] or
[DB3].
2
Press MENU, rotate the control dial to
select [GENERAL], then press it.
3
Rotate the control dial to select [SET
AUTOSCAN], then press it.
The unit updates the list of services in Quick-
BrowZer mode.
DAB
Hard Soft Hard
Link Link Link
 
  
FM
Soft
Link
