Table of Contents
Advertisement
Lock Function
Auto Lock Function
This function prevents any other person from using the handset without permission. If locked, the handset
can't be used to dial or use any other function
Press [MENU]
• Default parameter of lock code at the purchase is "0000"
•
Select the parameter you want using scroll button and press [ STO] button.
• Lock function is ended when the 4-digit lock code is entered when the handset is in lock status
• " AFTER POWER" : lock the handset when power is cycled.
• " NOW " : lock the handset immediately
• "OFF " : unlock the handset
Note
Receiving call, Emergency dialing, Hot-line dialing, Alarming
function still used
Lock code change
This function is used when you change a 4-digit lock code, which is necessary after you release the locking
status of the handset.
Press [MENU]
• Default parameter of the lock code is set to "0000"
when shipped out of factory
• Enter 4-digit new lock code.
• Enter the lock code once again
• Press [STO]
[9]
[Lock Code]
[1]
[9]
[Lock Code]
[1]
[1]
[2]
32
Advertisement
Table of Contents
