Chapter 1 Prior to Use Names and function of each part Screen status display and function...
Page 3
Role of the function buttons [TALK] This button is used when you make a call or receive a call. [END] This button is used when you terminate a call or exit the current menu in the menu [RCL] This button is used when you look up the list of stored phone numbers or names or the phone number you just called.
Screen status display and function Signal strength The strength of current signal is displayed with the number (0-5) of bar. Roaming This icon shows the user is outside the normal service area . Service possible/impossible When you are in an area where service possible, displayed.
MENU STRUCTURE Menu Submenu 1: BILLING 2: SETTING 1: AUTO RETRY 1: INTERVAL 2: AUTO ANSWER 2: REPEAT 3: AUTO HYPHEN 4: DTMF LENGTH 1: SHORT 2: LONG 5: ONE TOUCH 3: DISPLAY 1: DSPLY TIME 2: BANNER 3: LCD CONTST 4 :BACK LIGHT 1: AUTO LIGHT...
Page 7
Menu Submenu 6: BIO RHYTHM 1: TODAY BIO 2: SOMEDAY BIO 3: BIRTHDAY ALERTS 1: MIN ALERT 2: FADE ALERT 3: ROAM ALERT 4: LOW SIGNAL 8: PHONE INFO 1: PHONE # 2: PHONE VERSION 3: EVRC MODE 9: SECURITY 1: LOCK 1: AUTO LOCK 2: CHANGE CODE.
Page 8
Menu 1: PHONE BOOK RECALL MENU 2: CALL LOGS MENU IN CALLS 1: SEND PHONE # 2: SCRATCH PAD 3: MUTE 1:HARD PAUSE DIAL MENU 2:TIME PAUSE ( DIAL BUTTON + [MENU] 3:ONE HYPHEN BUTTON) DIAL MENU IN CALLS 1:SEND PHONE # 2:HART PAUSE 3:TIME PAUSE 4:ONE HYPHEN...
How to use Menu function ♣ Please read this before you use your handset 1. In a standby screen, press [MENU] button. 2. To move around the menu, use scroll buttons. If you press the scroll button continuously, the menu passes by automatically.
Page 10
How to use handset How to turn the handset on • Press [PWR]button until the lamp turn on Handset is in locking status if “Lock code” is displayed on the screen. When the lock code is displaying, enter a 4-digit lock release number to unlock the handset.
How to call 1 Press area code + phone number in order How to modify a phone number you have entered: " number by number modification: Press [CLR] button. " Whole number modification: Press [CLR] button and hold more than 0.5 second.
Page 12
Phone number input method ! To call convention phone : area code + phone number+ [TALK] ! To call emergency numbers : emergency number ( 911,311,*911,#911,#311)+ [TALK] ! To call other cellular phone : area code + phone number+ [TALK] ! To call international number: international call identification number + country code + phone number + [TALK] ! To call wireless beeper:wireless beeper identification number + beeper number+ [TALK]...
" % TIME PAUSE : If you enter the pause character (T), the phone number entered after pause character will send automatically in three Any button except [PWR] button when seconds. phone bell rings or lamp blinks. • To end the call, press [END] button. How to answer calls Note If you set AUTO ANSWER function in advance, the call will be connected after...
When there is an incoming call, the sender’s phone number is displayed on the screen as following. Caller ID : 02 - 3 4 4 9 - 0 0 0 0 Missing message display function Displays calls that the user didn’t answered. Displays the number of missed calls and latest calling time.
Page 15
After adjusting the volume, store using [STO] button. " The volume level is stored automatically2 seconds after adjusting the volume.
Call functions Silent pad phone number storage function In this function a beep sound is blocked from transmission to the other party when you press a new phone number to store during a call. Press [MENU] 2 during a call Enter the phone number you want to store.
How to store a phone number You can store up to 100 frequently used phone numbers in memory. Enter the phone number you wish to store and press [STO] button Initial empty memory location number is displayed. If there is no empty memory, warning “MEMORY SPACE message saying...
How to make a call using a stored phone number One –touch /Two-touch dialing function This function lets you call stored phone number You can make a call conveniently using a stored mber without pressing [TALK] button . 0~9 : Press corresponding memory number and hold more than 1 second.
Page 20
Reference -How to enter letter characters using dial buttons- Select characters you wish to enter using the dial buttons. Dial button 1 repetition 2 repetitions 3 repetitions 4 repetitions 5 repetitions 2ABC 3DEF 4GHI 9WXYZ " When press [ ] button change the ~ "...
Page 21
How to find the phone numbers of your latest calls The user can search up to 20 latest called numbers Locate phone numbers you want Press [RCL] + [1] + [1] and using the scroll button " [*•] scans up the phone numbers [#•] shows 1: EDIT, 2: ERASE If you want to make a call to the corresponding number, press [TALK] button.
Page 22
Recalling by number • Enter a phone number (or part of the number) you want. After entering the number, press [RCL] button. • Locate the phone number you want using the scroll buttons. " [*•] scans up the phone numbers [#•] shows 1: EDIT, 2: ERASE •...
Chapter 4 Convenient Functions Auto Menu function How to adjust the screen status Select bell type Current time and day display function Alert function Phone directory function...
Auto Set Function Auto Retry interval function When a call is not connected because of too much traffic in the service system, this function retries the call automatically at a set interval. • Press [MENU] [2] [1] • Select the parameter you want using scroll button and press [STO] button "...
Page 25
and press [STO]button Auto Lighting Function This function is used in setting the day-light hours that do not need lighting. The function can be used after acquiring the system. The lighting will be on for the hours not set by the user. •...
Page 26
Current time and day display function This function displays current time, date, and day • Press [MENU] Select the designated parameter you want using scroll button • and press [STO]button . Change banner function This function changes banner displayed on the screen when you turn on your handset. You can enter a banner up to 14 characters long.
Page 27
Vibrate Selection This function can be conveniently used by setting the beep sound function when the user is in places where it is difficult to get calls. Press [MENU] • Select the vibrate you want using scroll button and press [STO]button Select Lamp Press [MENU] •...
Timer Function Verification of total air time Press [MENU] Verification of the last call time Press [MENU] Verification of home calls Press [MENU] Verification of roaming time Press [MENU] Alert Function Alert during a call Press [MENU] This function sounds an alert in every minute, letting you know the call lapse time. •...
Page 29
YES: sounds alert when calls can’t be made. NO: sounds no alert. Alert change of service This function sounds an alert and gives out a message when the handset enters a new service area, or when it enters other system service area, or when it leaves the user’s service area. Press [MENU] •...
Page 30
Self number check function This is a function to check the telephone number of the handset currently in use. Press [MENU] When the user press [# !] button in standby status, the handset’s phone number is displayed. Handset version check function This function checks the version of the handset currently in use.
Chapter 5 Security function These functions can be used by the subscriber only by entering 4 digit lock release code. The default code at the purchase is “0000”. lock function Use restricting function Contents clearing function Memory Clearing function...
Lock Function Auto Lock Function This function prevents any other person from using the handset without permission. If locked, the handset can’t be used to dial or use any other function [Lock Code] Press [MENU] • Default parameter of lock code at the purchase is “0000” •...
Use restricting function This is a function to restrict using certain functions in the handset. You can restrict five different functions independently. [Lock Code] Press [MENU] Default parameter of the lock code is set to “0000” when shipped out of factory. Using the scroll buttons, select the set parameter as YES.
Page 34
Locking the dial buttons This function blocks the use of dial buttons. However when this function is enabled, you can still make calls to numbers stored in the memory. Press Dial •[DIAL #] . Select the parameter you want using the scroll buttons. .
Page 35
Memory reset function This function sets each value set in the memory into a default status when the handset is shipped out of the factory. [Lock Code] Press [MENU] Default parameter of the lock code is set to “0000” when shipped out of factory.
Sound setup functions Answering mode 1 bell Ear Volume, Handsfree Volume 6 levels Phone Bell 8 levels Key Tone 4 levels Melody Ongdalsem Melody Speed Timer function Alarm setup Warning function Cancel all Security functions Auto lock Use Restriction Function Blocking incoming and outgoing calls, use of dial button, and use of memory Allow ' Items such as greeting, lock code, stored phone numbers, air time , alarm contents, preferred area code, and...
Page 37
[Lock Code] Press [MENU] Default parameter of the lock code is set to “0000” when shipped out of factory. • Select the parameter you want using scroll button and press [STO] button. Clearing air time in other service area This function clears air time used in other service area. [Lock Code] Press [MENU] Default parameter of the lock code is set to “0000”...
Chapter 6 Supplementary Functions • Reserved call and alarm warning • Melody input function Reserved call and alarm warning setup function This function sounds alarm at the set time and displays alarm contents on the screen. In case of reserved call, the user can use this function after acquiring the system..
Page 39
Checking alarm warnings Press [MENU] • Select alarm location number using scroll button ( ALARM XX # 1 0 / 2 5 , 1 2 : 0 0 • If there are more than 2 alarm warnings, No Message “( #” sign is displayed ' If you set the answering status at beep or lamp mode, the handset beeps in every 2 seconds at the designated time in alarm status.
Page 40
Entering alarm warning Alarm sound at the designated time, and the alarm sound stops when the user presses any button except the Power button or closed the cover. The alarm will sound for 1 minute. Press [MENU] Using scroll button, select the alarm location and press [ STO] button.
Page 41
Checking alarm Call Press [MENU] Checking reserved call contens. ALARM CALL 1 0 / 2 5 , 1 2 : 0 0 No Message 0 2 – 3 4 4 9 – 0 0 0 0 Entering call reservation Press [MENU] The input method for time, date, and message is identical to that of alarm warning input Entering phone number CALL NO ?
Melody setup function This function allows user to setup the user’s favorite melody as an answering bell sound. Entering melody Press [MENU] • Press [STO]button after entering melody. ' When the user press [RCL] button, previously entered melody is played with musical note displayed on the screen. ' To end the melody, press [END] button.
Melody speed adjustment • Press [MENU] • Current speed of entered melody is displayed.. Enter new speed value and press [STO] button. . MELODY TEMPO ? SEND To enter melody 1. When you press dial button ) to • , a quarter note is displayed. $, %, *, +, ,, -, ., /, 0, ) corresponds to musical note do, re, ' The dial button...
Page 44
Chapter 7 Short Message Service Function This chapter describes convenient function that allows you to send or receive a simple character message with the handset and that also allows you to check a voice message left in a voice mail service center. •...
Short Message Service Function This chapter describes convenient function that allows you to send or receive a simple character message with the handset and that also allows you to check a voice message left in a voice mail service center. Receiving a message Character Message When the handset receives a character message,...
Page 46
To Check the Received Message • Press button. "1: In Message 2: Erase All • Press the dial button “In Meassage”. New Message O O Voice O O Character . The unchecked character and voice [Voice*] [TEXT#] messages are displayed on the screen. Character Message •...
Page 47
Reference If during the check you want to call the person who sent the message, press [SEND] button. To delete a message, press [CLR] button. To return to the previous screen, press [END] button. Checking the received message Voice message •...