Hyundai P230E User Manual page 10

How to use handset
How to turn the handset on
• Press [PWR]button until the lamp turn on
!
Handset is in locking status if "Lock code"
is displayed on the screen.
When the lock code is displaying, enter a 4-digit
lock release number to unlock the handset.
then use.
!The default value of lock code is
! If there is a lot of stored information, it
takes
How to turn the handset off
• Press [PWR]button until the lamp turn on
!
"REGISTERING..." message is displayed when the user presses PWR button.
This message indicates
information, and that
means mobile telecommunications service system does not have to search the
user.
! ! ! ! If the "LOW BATTERY WARNING POWER OFF" message is displayed and the
power goes off,
there is a possibility of damaging the memory. Therefore, in that
case, do not turn the power on, and change or charge the battery
immediately.
! ! ! ! When the power goes off when the battery is separated while it was
power on status,
the calling time, phone number previous call, and frequently used area
code might not get stored properly.
"0000"..
that the handset
10
is registering the power off