GENERAL INFORMATION RANGE MODEL CODE The following symbols are used in this manual: TBPS 200 20117887 Identifies actions that require caution and CAUTION! = TBPS 300 20117888 adequate preparation. TBPS 430 20117889 TBPS 550 20117890 Identifies actions that you MUST NOT do.
GENERAL INFORMATION PRECAUTIONS IDENTIFICATION The operation of any appliance that uses electrical power de- solar heaters can be identified by: TBPS mands that a number of fundamental safety precautions be respected. In particular: Data plate This lists the technical specifications and performance of Never attempt to install the system without using suitable the product.
Page 4
GENERAL INFORMATION TECHNICAL SPECIFICATIONS TBPS DESCRIPTION 1000 Type of storage cylinder Vertical, glazed Heat exchanger layout Vertical, with elliptical section Storage cylinder capacity Useful non-solar volume (Vbu)* Solar usable volume (Vsol)** Diameter of storage cylinder with insulation 1000 1000 Diameter of storage cylinder without insulation Height with insulation 1338 1838...
Page 5
GENERAL INFORMATION TBPS EMPTYING IN 10’ 1000 PERFORMANCE RELATING TO INTEGRATION COIL Quantity of domestic water obtained in 10’ with heater pre-heated to 60°C (*) and primary exchanger at the indicated delivery temperature, considering an increase of the domestic water temperature of 30°C between inlet and outlet (ac- cording to EN 12897).
Page 6
INSTALLATION UNPACKING THE PRODUCT Wear suitable personal protective equipment and use suitable safety devices. solar heaters are supplied in a single TBPS package on a wooden pallet. PLACE OF INSTALLATION The insulation and the lining components of the models 750 and 1000 are supplied separately from the structural work and are to be assembled upon receiving the product as described solar heaters can be installed in all rooms...
INSTALLATION WATER CONNECTIONS TBPS 200 - 550 TBPS 750 - 1000 TBPS 1000 TBPS 750 TBPS DESCRIPTION 1000 Domestic hot water outlet 1” M 1"1/4 M Ø Outlet from boiler 1” M 1” M Ø Return to boiler 1” M 1”...
Do not use abrasive products, petrol or triethylene. End user RIELLO S.p.A. Via Ing. Pilade Riello, 7 37045 - Legnago (VR) www.thermital.it The manufacturer strives to continuously improve all products. Appearance, dimensions, technical specifications, standard equipment and accessories are therefore liable to modification without notice. END USER...
Need help?
Do you have a question about the TBPS 200 and is the answer not in the manual?
Questions and answers