Related Manuals for thermital BPS SOL ES Series
Summary of Contents for thermital BPS SOL ES Series
- Page 1 INSTRUCTIONS FOR THE INSTALLER AND FOR THE TECHNICAL ASSISTANCE CENTRE BPS SOL ES SOLAR STORAGE CYLINDER...
- Page 2 Dear Installer, thank you for choosing a THERMITAL BPS SOL ES solar storage cylinder, a modern high quality product, providing you with the utmost wellbeing and with a high level of reliability and safety. And this is particularly the case if the storage cylinder is entrusted to a THERMITAL Technical Assistance Centre which is specifically capable of carrying out routine maintenance, to keep it running at maximum efficiency, with low running costs and which has original spare parts if required.
-
Page 3: General Warnings
ES should only be used for the purposes foreseen rately, with water in a variable percentage (30 to by THERMITAL for which it has been designed. 50%) following the instructions in the THERMITAL N o contractual or extracontractual liability is accept- operating and maintenance manual. -
Page 4: Description Of The Appliance
- the careful study of the geometries of the tank and the coils that allow you to obtain the best performance in The THERMITAL BPS SOL ES storage cylinders can be terms of stratification, heat exchange and reactivation equipped with a specific solar regulator and they can eas-... - Page 5 TR - Thermometer AD1 - AD2 - Magnesium anode The THERMITAL solar storage cylinder BPS SOL ES is not equipped with load circulators which should be appropriately sized and installed on the system. For the recommended flow rate of the solar heating circuit, see the instructions for assembling the solar col- lector and the THERMITAL operation and maintenance manual of the storage system.
-
Page 6: Dimensions And Connections
DiMEnSiOnS AnD COnnECTiOnS AE - S 50 mm 90° 45° AE - S BPS SOL ES DESCRIPTION 1000 hT 1500 hT 2000 hT 3000 hT - Domestic hot water outlet 1”1/2 F 1”1/4 F 2" F 2" F Ø - Domestic cold water inlet 1”1/2 F 1”1/2 F 2"... -
Page 7: Receiving The Product
Installation of the AD1 - AD2 magnesium anodes The THERMITAL solar storage cylinders BPS SOL ES 2000 Use the anodes provided, during assembly respect the hT and 3000 hT are supplied in two separate packages:... - Page 8 On APPLiAnCES ThAT ARE OLD OR ThAT nEED TO BE UPDATED When the THERMITAL solar storage cylinders BPS SOL ES REFEREnCE VALUES are installed on old appliances or on appliances that need to...
-
Page 9: Maintenance
COMMiSSiOning Before the start-up and before testing the storage cylin- der, it is absolutely necessary to check that: - The non-domestic hot water circuit supply taps are open - Any water connections which connect to the respective boiler and to the water unit of the solar system have been carried out correctly - The procedure for washing and filling up the solar heat- ing circuit with the water-glycol - if necessary - has been... - Page 10 nOTES EngLiSh...
- Page 11 nOTES EngLiSh...
- Page 12 Via Mussa, 20 Z.I. - 35017 Piombino Dese (PD) - Italy Tel. 049.9323911 - Fax 049.9323972 - www.thermital.com - email: info@thermital.it Since the Company is constantly improving its range of products, the appearance and dimensions, the technical data, the equipment and accessories,...
Need help?
Do you have a question about the BPS SOL ES Series and is the answer not in the manual?
Questions and answers